36216-80-5 | Page 29 of 43 | Heterocyclic Building Blocks-Benzisoxazole

Some tips on Benzo[d]isoxazol-3-amine

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Benzo[d]isoxazol-3-amine, 36216-80-5

36216-80-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Analyzing the synthesis route of Benzo[d]isoxazol-3-amine

The chemical industry reduces the impact on the environment during synthesis,36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C).

The chemical industry reduces the impact on the environment during synthesis,36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Downstream synthetic route of Benzo[d]isoxazol-3-amine

36216-80-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,36216-80-5 ,Benzo[d]isoxazol-3-amine, other downstream synthetic routes, hurry up and to see

It is a common heterocyclic compound, the Benzisoxazole compound, Benzo[d]isoxazol-3-amine, cas is 36216-80-5 its synthesis route is as follows.

EXAMPLE 34 2,6-DICHLORO-N-(3-BENZISOXAZOLYL)BENZAMIDE 3-Aminobenzisoxazole (2 gram), 2,6-dichlorobenzoylchloride (2 gram), and 50 ml. of toluene are heated at reflux for 16 hours. After evaporation of the solvent at reduced pressure, the resultant oily semi-solid is triturated with ether. The solid so formed is then washed with ether and water and constitutes the desired product.

Reference£º
Patent; Eli Lilly and Company; US4322429; (1982); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Downstream synthetic route of Benzo[d]isoxazol-3-amine

To a stirred solution of 1-(3-phenyl-1,2,4-thiadiazol-5-yl)piperidine- 4-carboxylic acid (289 mg, 1.00 mmol) and DMF (0.010 mL) in THF (5.0 mL) was added oxalyl chloride (0.174 mL, 2.00 mmol) dropwise at 0 C. After stirring at room temperature for 1 h, the solvent was concentrated in vacuo. To the residue were added THF (5.0 mL), benzo[d]isoxazol-3-amine (134 mg, 1.00 mmol), and pyridine (0.404 mL, 5.00 mmol) at 0 C. The mixture was stirred at room temperature for 1.0 h, and the solvent was concentrated in vacuo. The residue was purified by silica gel column chromatography (hexane-EtOAc), and recrystallized from EtOAc- hexane to give 65a (60.3 mg, 15%) as colorless crystals, mp 204- 205 C. 1H NMR (300 MHz, CDCl3) d: 2.05-2.22 (4H, m), 2.88 (1H, bs), 3.36-3.45 (2H, m), 4.11-4.18 (2H, m), 7.32-7.63 (6H, m), 8.19-8.27 (3H, m), 9.46 (1H, br s). Analytical HPLC showed 97.4% purity.

Reference£º
Article; Kono, Mitsunori; Matsumoto, Takahiro; Kawamura, Toru; Nishimura, Atsushi; Kiyota, Yoshihiro; Oki, Hideyuki; Miyazaki, Junichi; Igaki, Shigeru; Behnke, Craig A.; Shimojo, Masato; Kori, Masakuni; Bioorganic and Medicinal Chemistry; vol. 21; 1; (2013); p. 28 – 41;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

New learning discoveries about 36216-80-5

To a solution of triethylamine (0. 0025 mol) in CH2Cl2 (5 ml) benzoylchloride (0.0025 mol) was added. The mixture stirred at RT and intermediate 3 (0.0025 mol) in CH2C12 (5 ml) added dropwise. The reaction mixture was stirred overnight at RT. The mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was purified by column chromatography over silicagel (eluent CH2Cl2) yielding O. OlOg compound 9 (yield of 2%, Melting Point 133C) and a fraction which was further purified by column chromatography over silicagel (eluent hexane/CH2Cl2) yielding 0.225 g of compound 10 (yield of 38%, Melting Point 97C-100C), and 0.100 g of compound 11 (yield of 17%, Melting Point 154C-160C).

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some tips on 36216-80-5

Name is Benzo[d]isoxazol-3-amine, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 36216-80-5, its synthesis route is as follows.

Example 4: (R)-l-(Benzo[rf]isoxazol-3-yIcarbamoylmethyl)-3-(l-phenyl- cycloheptanecarbonyloxy)-l-azonia-bicyclo[2.2.2]octane bromide To a mixture of benzo[36216-80-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,36216-80-5 ,Benzo[d]isoxazol-3-amine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; ASTRAZENECA AB; ARGENTA DISCOVERY LIMITED; WO2009/138707; (2009); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Analyzing the synthesis route of 36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by mass directed preparative HPLC to give the desired product. See Table B for reaction components and amounts used.

The important role of 36216-80-5

Name is Benzo[d]isoxazol-3-amine, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 36216-80-5, its synthesis route is as follows.

Method BA A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration or DCM extraction (2×1 ml.) and purified using silica gel column chromatography (EtOAc/petroleum benzine 40-60 C gradient) or preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used as well as purification conditions.

New learning discoveries about 36216-80-5

The chemical industry reduces the impact on the environment during synthesis,36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

General procedure: To a stirred solution of pyridin-2-amine (1.0 g, 10.6 mmol) and pyridine (1.01 mL, 12.7 mmol) in THF (35 mL) was added 2,2,2- trichloroethyl chloroformate (1.76 mL, 12.7 mmol) dropwise at 0 C. The mixture was stirred at 0 C for 1.5 h, poured into water, and extracted with EtOAc. The organic layer was washed with water, dried over anhydrous MgSO4, and concentrated in vacuo. The residue was triturated with Et2O-hexane to give 36 (1.76 g, 62%) as a colorless powder.

The chemical industry reduces the impact on the environment during synthesis,36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Extracurricular laboratory: Synthetic route of 36216-80-5

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is Benzo[d]isoxazol-3-amine, and cas is 36216-80-5, its synthesis route is as follows.

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CH2C12 (10 ml) was stirred at RT. Phenylacetylchloride (0.0025 mol) was added drop wise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was crystallized in isopropanol. Yielding 0.210 g compound 5 (yield of 84%), melting point 164C.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics