36216-80-5 | Page 34 of 43 | Heterocyclic Building Blocks-Benzisoxazole

A new synthetic route of 36216-80-5

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of Benzo[d]isoxazol-3-amine

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours when a second portion of benzenesulfonyl chloride was added and stirred for an additional 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and purified either by preparative mass-directed HPLC (up to 50 mg of crude material) or by silica gel column chromatography (0-40% EtOAc/petroleum benzine 40-60 C) to give the desired product. See Table C for reaction components and amounts used as well as purification conditions.

Some scientific research about Benzo[d]isoxazol-3-amine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

36216-80-5 A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A new synthetic route of Benzo[d]isoxazol-3-amine

Example 148: N-(benzo[d]isoxazol-3-yl)-2,4-dimethoxybenzenesulfonamide 148 A solution of 2,4-dimethoxybenzenesulfonyl chloride (0.18 g, 0.75 mmol) and benzo[d]isoxazol-3-amine (0.10 g, 0.75 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified twice by column chromatography (4 g Si02 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C then 4g Si02 cartridge, 0-35% EtOAc in petroleum benzine 40-60 C) to yield two batches (78 mg and 5 mg) of [183] the title compound (total mass 83 mg, 33 % yield) as white solids. 1H NMR (400 MHz, CDCI3) d 8.1 1 (d, J = 8.05 Hz, 1H), 7.79 (s, 1H), 7.70 (d, J = 8.81Hz, 1H), 7.57 – 7.50 (m, 1H), 7.47 – 7.40 (m, 1H), 7.37 – 7.29 (m, 1H), 6.50 (d, J = 2.27 Hz, 1H), 6.42 (dd, J = 2.25, 8.81Hz, 1H), 3.98 (s, 3H), 3.81 (s, 3H). LCMS-B: rt 3.20 min, m/z = 356.8 [M+Na]+, 334.8 [M+H]+.

New downstream synthetic route of 36216-80-5

To a solution of triethylamine (0. 0025 mol) in CH2Cl2 (5 ml) benzoylchloride (0.0025 mol) was added. The mixture stirred at RT and intermediate 3 (0.0025 mol) in CH2C12 (5 ml) added dropwise. The reaction mixture was stirred overnight at RT. The mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was purified by column chromatography over silicagel (eluent CH2Cl2) yielding O. OlOg compound 9 (yield of 2%, Melting Point 133C) and a fraction which was further purified by column chromatography over silicagel (eluent hexane/CH2Cl2) yielding 0.225 g of compound 10 (yield of 38%, Melting Point 97C-100C), and 0.100 g of compound 11 (yield of 17%, Melting Point 154C-160C)., 36216-80-5

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about Benzo[d]isoxazol-3-amine

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CH2C12 (10 ml) was stirred at RT. Phenylacetylchloride (0.0025 mol) was added drop wise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was crystallized in isopropanol. Yielding 0.210 g compound 5 (yield of 84%), melting point 164C.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 36216-80-5

To a stirred solution of 1-(3-phenyl-1,2,4-thiadiazol-5-yl)piperidine- 4-carboxylic acid (289 mg, 1.00 mmol) and DMF (0.010 mL) in THF (5.0 mL) was added oxalyl chloride (0.174 mL, 2.00 mmol) dropwise at 0 C. After stirring at room temperature for 1 h, the solvent was concentrated in vacuo. To the residue were added THF (5.0 mL), benzo[d]isoxazol-3-amine (134 mg, 1.00 mmol), and pyridine (0.404 mL, 5.00 mmol) at 0 C. The mixture was stirred at room temperature for 1.0 h, and the solvent was concentrated in vacuo. The residue was purified by silica gel column chromatography (hexane-EtOAc), and recrystallized from EtOAc- hexane to give 65a (60.3 mg, 15%) as colorless crystals, mp 204- 205 C. 1H NMR (300 MHz, CDCl3) d: 2.05-2.22 (4H, m), 2.88 (1H, bs), 3.36-3.45 (2H, m), 4.11-4.18 (2H, m), 7.32-7.63 (6H, m), 8.19-8.27 (3H, m), 9.46 (1H, br s). Analytical HPLC showed 97.4% purity.

Reference£º
Article; Kono, Mitsunori; Matsumoto, Takahiro; Kawamura, Toru; Nishimura, Atsushi; Kiyota, Yoshihiro; Oki, Hideyuki; Miyazaki, Junichi; Igaki, Shigeru; Behnke, Craig A.; Shimojo, Masato; Kori, Masakuni; Bioorganic and Medicinal Chemistry; vol. 21; 1; (2013); p. 28 – 41;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about Benzo[d]isoxazol-3-amine

EXAMPLE 12 3-[(4-pyridinyl)amino]-1,2-benzisoxazole A mixture of 3-amino-1,2-benzisoxazole (9.94 g, 74.18 mmole, prepared according to a method described in G. M. Shutske and K. J. Kapples, J. Heterocyclic Chem., 26, 1293 (1989)), 4-chloropyridine hydrochloride (22.27 g, 197 mmole) and 1-methyl-2-pyrolidinone was stirred vigorously at 130 C. for three hours. The reaction mixture was cooled, diluted with NaHCO3, and extracted with EtOAc, after which the organics were washed with water, dried (MgSO4), and concentrated. The residue was purified by flash chromatography (florisil, EtOAc), and then triturated with diethyl ether to yield 4.04 g (26%) of a fine brown solid. A 2.0 g portion was dissolved in boiling methanol and treated with charcoal (Darco) after which the product crystallized to yield 1.38 g of pale yellow crystals, mp 203 C. (dec.). ANALYSIS: Calculated for C12 H9 N3 O: 68.24% C; 4.29% H; 19.89% N; Found: 68.14% C; 4.12% H; 20.06% N.

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Incorporated; US5328920; (1994); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about Benzo[d]isoxazol-3-amine

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by mass directed preparative HPLC to give the desired product. See Table B for reaction components and amounts used.

Some scientific research about Benzo[d]isoxazol-3-amine

a) N-Benzo[d]isoxazol-3-yl-2-chloro-acetamide To a mixture of benzo[d]isoxazol-3-ylamine (1 g) and cesium carbonate (2.42 g) in dry DMF (20 mL), stirred at rt, was added bromoacetyl chloride (0.62 mL) by dropwise addition. After stirring the mixture for 8 hours, the reaction was poured into water (100 mL) and the products extracted into ether (2*200 mL). The combined extracts were dried over magnesium sulfate and concentrated to dryness. The crude product was purified on silica gel using ether/isohexane (4/6) to afford the sub-titled compound as a colourless solid (0.5 g). m/e 210 [M+H]+

Reference£º
Patent; Bull, Richard James; Skidmore, Elizabeth Anne; Ford, Rhonan Lee; Mather, Andrew Nigel; Mete, Antonio; US2011/172237; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics