Category: 651780-27-7

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, it is a common compound, a new synthetic route is introduced below.651780-27-7

651780-27-7, Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 651780-27-7, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 651780-27-7,651780-27-7

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A., 651780-27-7

According to the analysis of related databases, 651780-27-7, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

(21). Iris{dibenzylideneacetoae)dipailadiuffi (123.6 mg, 0.14 mmol, 9.0 MO1%), XantPhos ( 104 mg, 0. 8 mmo’l. 12 moi%), ethyl 6-bromobenzo|d]isoxazole-3-carboxylate (608 mg, 2.25 mmol, 1.5 eq.),l- jX4 raemoxypheny1)me&yI}pyjrazofo^^(381 mg, 1.5 mmol, 1.0 eq.) and cesium carbonate (731 rag, 2.25 mmol. 1 ,5 eq.) were charged in a microwave vial. The vial was evacuated and purged with nitrogen (3X) and 1,4-dioxane (7.5 mL) was added. The reaction mixture was subjected to a microwave reactor tor 140 “C. After 2 h, the reaction mixture was cooled and filtered through a pad of Celite which was washed with EtOAc. Solvents were removed. Purification using reverse phase (Giison HPLC, acidic method (ACN water/0.1% TFA), gradient; 61-91%). Giison fractions were neutralized with sat solo. NaHC:::1.8, 8.8 H IH), 7.48 (dd, ./ – 4.3, 8.6 Hz, l H), 730 (d, J:::8.7 Hz, 2H), 6.88 (ddd, J – 2.9, 4.9, 8.7 Hz, 2H), 5.56 (s, 2H), 4.87 (q, 7.0 Hz, 2H), 3.70 (s, 3H), 1.41 (t, J = 3.2 Hz, 3H). ES-MS GammaMu+l f : 443.3.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

Reference£º
Patent; VANDERBILT UNIVERSITY; CONN, P. Jeffrey; HOPKINS, Corey R.; LINDSLEY, Craig W.; NISWENDER, Colleen M.; ENGERS, Darren W.; PANARESE, Joe; BOLLINGER, Sean; ENGERS, Julie; (157 pag.)WO2016/115282; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, as follows.651780-27-7

651780-27-7, 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0. 081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A. Literature reference: Angell, R. M.; Baldwin, I. R.; Bamborough, P.; Deboeck, N. M.; Longstaff, T.; Swanson, S. W004010995A1 The following acid was prepared using this method: 1,2-Benzisoxazole-3-carboxylic acid.

According to the analysis of related databases, Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/63767; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, it is a common compound, a new synthetic route is introduced below.

To a mixture of ethyl 6-bromobenzisoxazole-3-carboxylate (2.0 g, 7.4 mmol) and t- butyl 5-cyanoanthranilate (1.62 g, 7.4 mmol) in toluene (27 [ML)] is added NaH (1.5 g of a 60% mineral oil dispersion, 3.8 mmol) under N2. The reaction mixture is stirred overnight at rt. This mixture is diluted with aq 1 N [HCI,] extracted with EtOAc (0.2 L). The EtOAc solution is dried and concentrated to give Preparation Pb as a solid : 1H NMR (300 MHz, CDC13) [8] 12.8 (1H), 9.05 [(1H),] 8.38 (1H), 8.18 (1H), 7.92 (1H), 7.82 (1H), 7.61 [(1H),] [1.] 69 [(9H).]

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 651780-27-7, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.651780-27-7,A new synthetic method of this compound is introduced below.

A mixture of ethyl 6-bromobenzoisoxazole-3-carboxylate (550 mg, 1.39 mmol), o- tolylboronic acid (377 mg, 1.5 [EQ),] Pd (PPh3) 4 (171 mg, 0.08 [EQ),] toluene (10 mL), ethanol (1.5 mL), and 1 M [NA2C03] (1.5 [ML)] is stirred at reflux for 3.5 h. The reaction mixture is diluted with [CHUCK] (0.1 L) and [H2O] (0.1 mL). The [CHZC12] solution is dried [(NA2S04),] filtered, and evaporated. The residue is purified by silica chromatography (heptane/EtOAc) to give Preparation [PA.’H] NMR (300 MHz, CDC) 8 8.14 (1H), 7.61 (2H), 7.42 (1H), 7.35-7. 2 (1H), 4.59 (2H), 2.28 (3H), 1.51 (3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7,The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 651780-27-7

651780-27-7, 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0. 081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A. Literature reference: Angell, R. M.; Baldwin, I. R.; Bamborough, P.; Deboeck, N. M.; Longstaff, T.; Swanson, S. W004010995A1 The following acid was prepared using this method: 1,2-Benzisoxazole-3-carboxylic acid.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/63767; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 651780-27-7,651780-27-7

651780-27-7, 20a) Ethyl 6-(4-hydroxyphenyl)-l,2-benzisoxazole-3-carboxylateEthyl 6-bromo-l,2-benzisoxazole-3-carboxylate (0.34 g, 1.26 mmol), (4- hydroxyphenyl)boronic acid (0.21, 1.51 mmol), tetrakis(triphenylphosphine)palladium (0) (0.06 g, 0.05 mmol) and 2 M sodium carbonate (5 mL) in 1 ,2-dimethoxyethane (6 mL) were stirred at 80 0C for 1 hour. The reaction mixture was diluted with water, followed by ethyl acetate. The layers were separated and the ethyl acetate layer was washed with brine, dried over magnesium sulfate, filtered, and concentrated to afford the crude material. The crude material was purified using hexanes: ethyl acetate (0 to 40% ethyl acetate) to afford a mixture of desired product, plus the free acid of the desired product, 6-(4-hydroxyphenyl)-l,2- benzisoxazole-3-carboxylic acid. All the fractions were combined and concentrated. The mixture was then dissolved in ethanol. Thionyl chloride was added, and the reaction mixture was reflux for 8 days. The reaction mixture was cooled to room temperature and concentrated. The concentrated material was diluted with 5% sodium bicarbonate, and extracted with ethyl acetate. The ethyl acetate layer was washed with water followed by brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified using hexanes: ethyl acetate (0 to 100% ethyl acetate) to afford 0.044 g (13%) of ethyl 6-(4-hydroxyphenyl)- 1 ,2-benzisoxazole-3- carboxylate. 1H NMR (400 MHz, d6-DMSO): delta 9.76 (s, IH), 8.05 (m, 2H), 7.79 (dd, J = 8, 1 Hz, IH), 7.65 (d, J = 9 Hz, 2H), 6.88 (d, J = 9 Hz, 2H), 4.47 (q, J = 7 Hz, 2H), 1.39 (t, J = 7 Hz, 3H).

According to the analysis of related databases, 651780-27-7, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157270; (2008); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Name is Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 651780-27-7, its synthesis route is as follows.

10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0. 081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A. Literature reference: Angell, R. M.; Baldwin, I. R.; Bamborough, P.; Deboeck, N. M.; Longstaff, T.; Swanson, S. W004010995A1 The following acid was prepared using this method: 1,2-Benzisoxazole-3-carboxylic acid.

651780-27-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,651780-27-7 ,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/63767; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A.

The chemical industry reduces the impact on the environment during synthesis,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics