Category: 719-64-2

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, as follows.719-64-2

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-3-phenylbenzo[c]isoxazole, and friends who are interested can also refer to it.

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2 A common heterocyclic compound, 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The preparation method is as follows: 5-chloro-3-phenyl 2,1-benzisoxazole (commercially available) (0.3 mmol, 68.7 mg), phenylacetaldehyde (0.6 mmol, 72.0 mg), copper powder (0.06) Methanol, 3.8 mg) and silver triflate (0.03 mmol, 8.0 mg) were added to a 25 ml Schlenk tube, and the reaction tube was replaced with oxygen three times under reduced pressure.Hexafluoroisopropanol (2 ml) was added and stirred at 110 C for 30 hours.After completion of the reaction, a column chromatography of silica gel of 100-200 mesh was added, and the solvent was evaporated under reduced pressure. The crude product was subjected to silica gel column chromatography, eluting with petroleum ether and ethyl acetate ( petroleum ether: ethyl acetate = 20:1) The liquid was eluted, and the elution was carried out by TLC elution. The eluate containing the desired product was collected, and the desired product eluent was combined and evaporated to give the quinoline compound of the formula i above, yield 69%. This material is a red solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 719-64-2 reaction routes.

Reference£º
Patent; Jiangnan University; Zou Lianghua; Zhu Hao; Zhu Shuai; Li Pinggui; Yan Cheng; (12 pag.)CN110204486; (2019); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, as follows.719-64-2

(2) Take 10.0g of intermediate (II) into a three-necked bottle.50ml ethanol, 4.8g iron powder,After refluxing for 0.5 h, 1 ml of sulfuric acid (6 mol/L) was added dropwise.After the completion of the dropwise addition, the reaction was refluxed for 1 h.After the reaction is completed, a NaOH solution is added to adjust the pH to 8,Cool down to 50 C, add 0.2g activated carbon,Reflux for 0.5h,Thermal filtration into the crystallization bottle, cooling and crystallization,Ethanol washing, drying to obtain intermediate (III) 9.60g, The yield is 95.1%.The melting point is 96.3-98.2 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 719-64-2, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Qilu Tianhe Huishi Pharmaceutical Co., Ltd.; Yuwen Li; Guan Qinghua; Zhao Xudong; Li Baoyong; (6 pag.)CN108250091; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.719-64-2,A new synthetic method of this compound is introduced below.

1) Weigh 180 g of raw material 5-chloro-3-phenyl-2,1-benzisoxazole into 1.5 L of anhydrous methanol and 1.5 L of acetonitrile,After stirring and dissolving, add 10g Pd/C catalyst with Pd content of 3%, stir and mix to form material I,The flow rate of the slurry pump was adjusted so that the flow rate of the material I was 40.0 g/min and entered the preheating module of the microreactor. 2) Adjust the flow rate of the H2 gas flowmeter to 350ml/min, and directly enter the reaction module group and material I to undergo catalytic hydrogenation reaction without preheating.As shown in Figure 2, the molar ratio of 5-chloro-3-phenyl-2,1-benzisoxazole to hydrogen is 1:1.2, the reaction temperature is 80C, the residence time of the reaction is 35s, and the reaction pressure is 1.0Mpa; then enter the cooling module, cooling module temperature is 30 C,Collect the reaction solution from the outlet of the cooling module, recover the catalyst by filtration, and recover the solvent by distillation under reduced pressure.The residue was recrystallized from 80% ethanol solution to obtain the target product 2-amino-5-chlorobenzophenone, 168.96g, yield 92.79%, purity 99.68%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 5-Chloro-3-phenylbenzo[c]isoxazole.

Reference£º
Patent; Heilongjiang Xinchuang Bio-technology Development Co., Ltd.; Ren Jiqiu; Yang Kun; Li Haitao; (10 pag.)CN107935872; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

That is, using the above conditions, Aldimine 1a (54.7mg, 0.2mmol, 100mol%),[RhCp * Cl2] 2 (3.1mg, 0.005mmol, 2.5mol%), AgSbF6 (6.9mg, 0.02mmol, 10mol%),Then in an oven dried and sealed tube filled with PivOH (10.2mg, 0.1mmol, 50mol%),Under room temperature and air, anthranyl 2a (68.9 mg, 0.3 mmol, 200 mol%) and DMF (1 mL) were added.The reaction mixture was stirred at 120 C. for 6 hours and cooled to room temperature.The reaction mixture was diluted with EtOAc (3 mL) and concentrated in vacuo.The residue was purified by flash column chromatography (n-hexane / EtOAc = 7: 1) to give 3a (48.2 mg) in 73% yield.

The chemical industry reduces the impact on the environment during synthesis,719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SUNGKYUNKWAN University Research & Business Foundation; Kim In-su; Kim Hyeong-sik; (41 pag.)KR2020/25255; (2020); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

A, in a reaction vessel equipped with a stirrer, a reflux condenser, 5-chloro-3-phenyl-benzisoxazole 0.26 mol, the mass fraction of 30% 2-bromo-5-fluoronitrobenzene solution 390ml, nickel chloride powder 0.46 mol, control the stirring speed at 190 rpm, raise the solution temperature to 78 C, reflux reaction 120 min; B, adding 90% of 4-chlorophenethylamine solution with a mass fraction of 21% slowly add the ethylene glycol dimethyl ether solution with a mass fraction of 37% adding time to control at 110min, continue to reflux reaction 5h. C, add the mass fraction of 27% sodium bicarbonate solution 200ml, reduce the solution temperature to 16 C, molecular sieve bleaching, filtration, the filtrate was concentrated, again lowering the solution temperature to 5 C, the mass fraction of 70% triethylamine solution washing, calcium oxide dehydrating agent dehydration, to give crystals of 2-amino-5-chlorobenzophenone 55.59 g, yield 92%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 719-64-2, 5-Chloro-3-phenylbenzo[c]isoxazole

Reference£º
Patent; Chengdu Qiesite Technology Co., Ltd.; Peng Fei; (9 pag.)CN106083621; (2016); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is 5-Chloro-3-phenylbenzo[c]isoxazole, and cas is 719-64-2, its synthesis route is as follows.

(2) Take 10.0g of intermediate (II) into a three-necked bottle.50ml ethanol, 4.8g iron powder,After refluxing for 0.5 h, 1 ml of sulfuric acid (6 mol/L) was added dropwise.After the completion of the dropwise addition, the reaction was refluxed for 1 h.After the reaction is completed, a NaOH solution is added to adjust the pH to 8,Cool down to 50 C, add 0.2g activated carbon,Reflux for 0.5h,Thermal filtration into the crystallization bottle, cooling and crystallization,Ethanol washing, drying to obtain intermediate (III) 9.60g, The yield is 95.1%.The melting point is 96.3-98.2 C.

719-64-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,719-64-2 ,5-Chloro-3-phenylbenzo[c]isoxazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Qilu Tianhe Huishi Pharmaceutical Co., Ltd.; Yuwen Li; Guan Qinghua; Zhao Xudong; Li Baoyong; (6 pag.)CN108250091; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

1) Weigh 180 g of raw material 5-chloro-3-phenyl-2,1-benzisoxazole into 1.5 L of anhydrous methanol and 1.5 L of acetonitrile,After stirring and dissolving, add 10g Pd/C catalyst with Pd content of 3%, stir and mix to form material I,The flow rate of the slurry pump was adjusted so that the flow rate of the material I was 40.0 g/min and entered the preheating module of the microreactor. 2) Adjust the flow rate of the H2 gas flowmeter to 350ml/min, and directly enter the reaction module group and material I to undergo catalytic hydrogenation reaction without preheating.As shown in Figure 2, the molar ratio of 5-chloro-3-phenyl-2,1-benzisoxazole to hydrogen is 1:1.2, the reaction temperature is 80C, the residence time of the reaction is 35s, and the reaction pressure is 1.0Mpa; then enter the cooling module, cooling module temperature is 30 C,Collect the reaction solution from the outlet of the cooling module, recover the catalyst by filtration, and recover the solvent by distillation under reduced pressure.The residue was recrystallized from 80% ethanol solution to obtain the target product 2-amino-5-chlorobenzophenone, 168.96g, yield 92.79%, purity 99.68%.

The chemical industry reduces the impact on the environment during synthesis,719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Heilongjiang Xinchuang Bio-technology Development Co., Ltd.; Ren Jiqiu; Yang Kun; Li Haitao; (10 pag.)CN107935872; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Name is 5-Chloro-3-phenylbenzo[c]isoxazole, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 719-64-2, its synthesis route is as follows.

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

719-64-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,719-64-2 ,5-Chloro-3-phenylbenzo[c]isoxazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound, it is a common compound, a new synthetic route is introduced below.

The preparation method is as follows: 5-chloro-3-phenyl 2,1-benzisoxazole (commercially available) (0.3 mmol, 68.7 mg), phenylacetaldehyde (0.6 mmol, 72.0 mg), copper powder (0.06) Methanol, 3.8 mg) and silver triflate (0.03 mmol, 8.0 mg) were added to a 25 ml Schlenk tube, and the reaction tube was replaced with oxygen three times under reduced pressure.Hexafluoroisopropanol (2 ml) was added and stirred at 110 C for 30 hours.After completion of the reaction, a column chromatography of silica gel of 100-200 mesh was added, and the solvent was evaporated under reduced pressure. The crude product was subjected to silica gel column chromatography, eluting with petroleum ether and ethyl acetate ( petroleum ether: ethyl acetate = 20:1) The liquid was eluted, and the elution was carried out by TLC elution. The eluate containing the desired product was collected, and the desired product eluent was combined and evaporated to give the quinoline compound of the formula i above, yield 69%. This material is a red solid.

The chemical industry reduces the impact on the environment during synthesis,719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Jiangnan University; Zou Lianghua; Zhu Hao; Zhu Shuai; Li Pinggui; Yan Cheng; (12 pag.)CN110204486; (2019); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics