Category: Benzisoxazole

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound. An updated downstream synthesis route of 719-64-2 as follows. 719-64-2

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 719-64-2

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 37924-85-9, name is 3-(Bromomethyl)benzo[d]isoxazole, introduce a new downstream synthesis route as follows.

BIOS-Na (Compound III) was prepared in accordance with the method described in Example 1 of U.S. Pat. No. 4,172,896. A solution of sodium sulfite (24.3 grams) in water (390 ml) was added to a solution of 3-bromomethyl-1,2-benzisoxazole (24 grams, Compound II) in methanol (390 ml), stirred with heating to 50 C. for 4 hours. After completion of the reaction, the solution was concentrated under reduced pressure. The resulting crystalline residue was heated to about 50-60 C. in methanol (750 ml) and the solution filtered. The clear filtrate was concentrated under reduced pressure and the resulting crystalline residue was washed with diethyl ether to give crystalline sodium 1,2-benzisoxazole-3-methanesulfonate (18 grams, BIOS-Na, Compound III). Thc thus-produced BIOS-Na was analyzed using X-Ray powder diffraction (results depicted in FIG. 1), differential scanning calorimetry (results depicted in FIG. 2) and thermal gravimetry (results depicted in FIG. 3). The water content of the thus-produced BIOS-Na was 7% as measured by Karl-Fischer titration, indicating that the crystals were of BIOS-Na monohydrate., 37924-85-9

According to the analysis of related databases, 37924-85-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Naddaka, Vladimir; Adin, Itai; Klopfer, Eyal; Arad, Oded; Kaspi, Joseph; US2006/9644; (2006); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 36216-80-5, name is Benzo[d]isoxazol-3-amine, introduce a new downstream synthesis route as follows.

To a solution of triethylamine (0. 0025 mol) in CH2Cl2 (5 ml) benzoylchloride (0.0025 mol) was added. The mixture stirred at RT and intermediate 3 (0.0025 mol) in CH2C12 (5 ml) added dropwise. The reaction mixture was stirred overnight at RT. The mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was purified by column chromatography over silicagel (eluent CH2Cl2) yielding O. OlOg compound 9 (yield of 2%, Melting Point 133C) and a fraction which was further purified by column chromatography over silicagel (eluent hexane/CH2Cl2) yielding 0.225 g of compound 10 (yield of 38%, Melting Point 97C-100C), and 0.100 g of compound 11 (yield of 17%, Melting Point 154C-160C)., 36216-80-5

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about Benzo[d]isoxazol-3-amine.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

28691-49-8, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.6-Chlorobenzo[d]isoxazole-3-carboxylic acid, cas is 28691-49-8,the Benzisoxazole compound, below Introduce a new synthetic route.

Example 54 (6-Chlorobenzo[d]isoxazol-3-yl)(2-methyl-3-phenyl-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)methanone To a solution of 6-chlorobenzo[d]isoxazole-3-carboxylic acid (52 mg, 0.263 mmol) in dichloromethane (600 muL) was added N,N-dimethylformamide (10 muL, 0.13 mmol, 0.948 g/mL) and oxalyl chloride (25 muL, 0.287 mmol, 1.45 g/mL) at 0 C. The reaction mixture was stirred at 0 C. for 5 min. To the reaction mixture was added 2-methyl-3-phenyl-4,5,6,7-tetrahydropyrazolo[3,4-c]pyridine, Intermediate 1 (55 mg, 0.258 mmol) at 0 C. The reaction mixture was allowed to warm to room temperature and stirred for 18 h. The reaction mixture was diluted with water (2 mL) and extracted with ethyl acetate (2*5 mL). The combined organic layers were washed with 10% potassium bisulfate (1*5 mL), 1 M sodium carbonate (1*5 mL) and brine (1*5 mL), dried over magnesium sulfate, filtered and evaporated. The residue was purified by reverse phase HPLC to afford the title compound (14 mg, 0.036 mmol, 13%) as an off-white powder. MS (ESI): mass calcd. for C21H17ClN4O2, 392.1; m/z found, 393.1 [M+H]+. 1H NMR (500 MHz, DMSO-d6) delta 8.15-8.12 (m, 1H), 7.96 (d, J=8.5 Hz, 1H), 7.58-7.42 (m, 6H), 4.86 (s, 2H), 3.88-3.83 (m, 2H), 3.79 (s, 3H), 2.67-2.60 (m, 2H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 28691-49-8.

Reference£º
Patent; Janssen Pharmaceutica NV; Ameriks, Michael K.; Chen, Gang; Huang, Chaofeng; Laforteza, Brian Ngo; Ravula, Suchitra; Southgate, Emma Helen; Zhang, Wei; US2020/102303; (2020); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 36216-80-5, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. A new synthetic method of this compound is introduced below.

EXAMPLE 34 2,6-DICHLORO-N-(3-BENZISOXAZOLYL)BENZAMIDE 3-Aminobenzisoxazole (2 gram), 2,6-dichlorobenzoylchloride (2 gram), and 50 ml. of toluene are heated at reflux for 16 hours. After evaporation of the solvent at reduced pressure, the resultant oily semi-solid is triturated with ether. The solid so formed is then washed with ether and water and constitutes the desired product.

36216-80-5, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 36216-80-5, you can also browse my other articles.

Reference£º
Patent; Eli Lilly and Company; US4322429; (1982); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A balanced equation for a chemical reaction indicates what is reacting and what is produced, 719-64-2, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound. An updated downstream synthesis route of 719-64-2 as follows.

719-64-2, The preparation method is as follows: 5-chloro-3-phenyl 2,1-benzisoxazole (commercially available) (0.3 mmol, 68.7 mg), phenylacetaldehyde (0.6 mmol, 72.0 mg), copper powder (0.06) Methanol, 3.8 mg) and silver triflate (0.03 mmol, 8.0 mg) were added to a 25 ml Schlenk tube, and the reaction tube was replaced with oxygen three times under reduced pressure.Hexafluoroisopropanol (2 ml) was added and stirred at 110 C for 30 hours.After completion of the reaction, a column chromatography of silica gel of 100-200 mesh was added, and the solvent was evaporated under reduced pressure. The crude product was subjected to silica gel column chromatography, eluting with petroleum ether and ethyl acetate ( petroleum ether: ethyl acetate = 20:1) The liquid was eluted, and the elution was carried out by TLC elution. The eluate containing the desired product was collected, and the desired product eluent was combined and evaporated to give the quinoline compound of the formula i above, yield 69%. This material is a red solid.

719-64-2, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 719-64-2

Reference£º
Patent; Jiangnan University; Zou Lianghua; Zhu Hao; Zhu Shuai; Li Pinggui; Yan Cheng; (12 pag.)CN110204486; (2019); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 651780-27-7, name is Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, introduce a new downstream synthesis route as follows.

A mixture of ethyl 6-bromobenzoisoxazole-3-carboxylate (550 mg, 1.39 mmol), o- tolylboronic acid (377 mg, 1.5 [EQ),] Pd (PPh3) 4 (171 mg, 0.08 [EQ),] toluene (10 mL), ethanol (1.5 mL), and 1 M [NA2C03] (1.5 [ML)] is stirred at reflux for 3.5 h. The reaction mixture is diluted with [CHUCK] (0.1 L) and [H2O] (0.1 mL). The [CHZC12] solution is dried [(NA2S04),] filtered, and evaporated. The residue is purified by silica chromatography (heptane/EtOAc) to give Preparation [PA.’H] NMR (300 MHz, CDC) 8 8.14 (1H), 7.61 (2H), 7.42 (1H), 7.35-7. 2 (1H), 4.59 (2H), 2.28 (3H), 1.51 (3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

28691-49-8, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.6-Chlorobenzo[d]isoxazole-3-carboxylic acid, cas is 28691-49-8,the Benzisoxazole compound, below Introduce a new synthetic route.

Example 54 (6-Chlorobenzo[d]isoxazol-3-yl)(2-methyl-3-phenyl-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)methanone To a solution of 6-chlorobenzo[d]isoxazole-3-carboxylic acid (52 mg, 0.263 mmol) in dichloromethane (600 muL) was added N,N-dimethylformamide (10 muL, 0.13 mmol, 0.948 g/mL) and oxalyl chloride (25 muL, 0.287 mmol, 1.45 g/mL) at 0 C. The reaction mixture was stirred at 0 C. for 5 min. To the reaction mixture was added 2-methyl-3-phenyl-4,5,6,7-tetrahydropyrazolo[3,4-c]pyridine, Intermediate 1 (55 mg, 0.258 mmol) at 0 C. The reaction mixture was allowed to warm to room temperature and stirred for 18 h. The reaction mixture was diluted with water (2 mL) and extracted with ethyl acetate (2*5 mL). The combined organic layers were washed with 10% potassium bisulfate (1*5 mL), 1 M sodium carbonate (1*5 mL) and brine (1*5 mL), dried over magnesium sulfate, filtered and evaporated. The residue was purified by reverse phase HPLC to afford the title compound (14 mg, 0.036 mmol, 13%) as an off-white powder. MS (ESI): mass calcd. for C21H17ClN4O2, 392.1; m/z found, 393.1 [M+H]+. 1H NMR (500 MHz, DMSO-d6) delta 8.15-8.12 (m, 1H), 7.96 (d, J=8.5 Hz, 1H), 7.58-7.42 (m, 6H), 4.86 (s, 2H), 3.88-3.83 (m, 2H), 3.79 (s, 3H), 2.67-2.60 (m, 2H)., 28691-49-8

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Chlorobenzo[d]isoxazole-3-carboxylic acid, and friends who are interested can also refer to it.

Reference£º
Patent; Janssen Pharmaceutica NV; Ameriks, Michael K.; Chen, Gang; Huang, Chaofeng; Laforteza, Brian Ngo; Ravula, Suchitra; Southgate, Emma Helen; Zhang, Wei; US2020/102303; (2020); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 5-Methylbenzo[d]isoxazol-3-amine, cas is 89976-56-7,the Benzisoxazole compound, below Introduce a new synthetic route., 89976-56-7

89976-56-7, A solution of 2,4-dimethoxybenzene-1-sulfonyl chloride (0.0799 g, 0.337 mmol) and 5-methylbenzo[d]isoxazol-3-amine I60 (0.050 g, 0.34 mmol) in pyridine (1 ml.) was irradiated in the microwave at 110 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified by column chromatography (12 g S1O2 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C) [205] to yield the title compound (55.0 mg, 42% yield) as a white solid. NMR (400 MHz, CDCb) d 7.86 – 7.82 (m,1H), 7.72 (d, J = 8.81Hz, 1H), 7.37 – 7.28 (m, 2H), 6.49 (d, J = 2.26 Hz, 1H), 6.43 (dd, J = 2.29, 8.82 Hz, 1H), 3.96 (s, 3H), 3.80 (s, 3H), 2.47 (s, 3H). LCMS-A: rt 5.66 min, m/z 348.8 [M+H]+, 347.1 [M-H]

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 5-Methylbenzo[d]isoxazol-3-amine.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound. 37924-85-9. Here is a downstream synthesis route of the compound 37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.Step 1: To a 0C solution of -4:1 mixture of tert-butyl (S)-1-((S)-1-(benzo[djisoxazol-3- ylmethyl)-2-oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1,41 diazepin-3 -ylamino)- 1 -oxopropan-2- yl(methyl)carbamate and tert-butyl (S)-i -((S)-i -(benzo[dlisoxazol-3-ylmethyl)-4-oxo-2,3 ,4,5- tetrahydro- 1 H-benzo [bI [1 ,4ldiazepin-3-ylamino)- 1 -oxopropan-2-yl(methyl)carbamate (209.4 mg, 424 tmol) in CH2C12 (4.24 mL) was added pyridine (343 tL, 4.24 mmol), followed by methyl 4-(chlorocarbonyl)benzoate (92.7 mg, 467 tmol). After 1 h at 0 C the mixture was diluted with H20 and extracted with CH2C12. The combined extracts were washed with 1 N aq. citric acid, sat. aq. NaHCO3, and brine, dried over Na2504, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide methyl 4-((S)-5-(benzo[djisoxazol-3 -ylmethyl)-3 -((S)-2-(tert-butoxycarbonyl(methyl)amino) propanamido)-4-oxo-2,3 ,4,5 -tetrahydro- 1 Hbenzo[b l[1,4ldiazepine-1-carbonyl)benzoate (194 mg, 70 %) as a white solid. LC-MS mlz 678 [M+Naj .

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 37924-85-9

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics