Category: Benzisoxazole

36216-80-5, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 36216-80-5, name is Benzo[d]isoxazol-3-amine, introduce a new downstream synthesis route as follows.

Example 4: (R)-l-(Benzo[rf]isoxazol-3-yIcarbamoylmethyl)-3-(l-phenyl- cycloheptanecarbonyloxy)-l-azonia-bicyclo[2.2.2]octane bromide To a mixture of benzo[Patent; ASTRAZENECA AB; ARGENTA DISCOVERY LIMITED; WO2009/138707; (2009); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 36216-80-5

Method BA A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration or DCM extraction (2×1 ml.) and purified using silica gel column chromatography (EtOAc/petroleum benzine 40-60 C gradient) or preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used as well as purification conditions.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Benzo[d]isoxazol-3-amine.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.Benzo[d]isoxazol-5-amine, cas is 239097-74-6,the Benzisoxazole compound. An updated downstream synthesis route of 239097-74-6 as follows. 239097-74-6

To a suspension of intermediate ester (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of 1,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated NaHCO3 to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous Na2SO4, filtered and concentrated. The residue was purified by trituration in DCM/Et2O, collected by filtration, and dried in vacuo to give the title compound (50 mg, 48%) as a yellow solid.1H NMR (400 MHz, CDCl3): delta 10.05 (s, 1H), 8.72 (s, 1H), 8.55 (s, 1H), 8.07 (s, 1H), 7.68 (dd, J = 6.8 Hz, 1.6 Hz, 1H), 7.59 (d, J = 6.8 Hz, 1H), 6.59 (s, 1H), 2.71 (s, 3H), 2.70 (s, 3H). LC-MS m/z: 308.1 [M+H+]. HPLC Purity (214 nm): 98%; tR = 8.38 min.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 239097-74-6, if you are interested., 239097-74-6

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse Marie, Josee; (134 pag.)WO2016/73889; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 37924-85-9, name is 3-(Bromomethyl)benzo[d]isoxazole, introduce a new downstream synthesis route as follows. 37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-(Bromomethyl)benzo[d]isoxazole.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-6-amine, cas is 828300-70-5,the Benzisoxazole compound. 828300-70-5. Here is a downstream synthesis route of the compound 828300-70-5

A quantity of 0.13 g (1 mmole) OF BENZO [d] isoxazol-6-ylamine is treated with 0.27 g (1 mmole) of 6, 8-Dibromo-imidazo [1, 2-a] pyrazine in acetonitrile with 3 eq. OF K2C03 AT REFLUX for 16 hrs. The reaction mixture is cooled partitioned between ethyl acetate and water, the organic extracts are dried over anhydrous MGSO4 and evaporated in vacuo to afford Benzo [d] ISOXAZOL-6-YL- (6-BROMO- imidazo [1, 2-A] PYRAZIN-8-YL)-AMINE

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 828300-70-5

Reference£º
Patent; CELLULAR GENOMICS, INC.; WO2005/5429; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route.

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CHzClz (10 ml) was stirred at RT. 2-methylpropanoyl chloride (0.0025 mol) was added dropwise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated dry. The residue was further purified by column chromatography over silicagel (eluent: CH2Cl2) yielding 0.235 g of compound 8 and a fraction which was further purified using reversed phase HPLC chromatography on a Xterra MS C18 column (3. 5, um, 4.6 x 100 mm) with a flow rate of 1.6 m ./min (Elution conditions: three mobile phases (mobile phase A 95% 25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min. , to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 7 (Melting Point 130C).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about Benzo[d]isoxazol-3-amine.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route., 36216-80-5

Method BA A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration or DCM extraction (2×1 ml.) and purified using silica gel column chromatography (EtOAc/petroleum benzine 40-60 C gradient) or preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used as well as purification conditions.

According to the analysis of related databases, Benzo[d]isoxazol-3-amine, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

One of the major reasons is to use measurements of the macroscopic properties of a system, 828300-70-5, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Benzo[d]isoxazol-6-amine, cas is 828300-70-5,the Benzisoxazole compound, introduce a new downstream synthesis route.

A quantity of 0.13 g (1 mmole) OF BENZO [d] isoxazol-6-ylamine is treated with 0.27 g (1 mmole) of 6, 8-Dibromo-imidazo [1, 2-a] pyrazine in acetonitrile with 3 eq. OF K2C03 AT REFLUX for 16 hrs. The reaction mixture is cooled partitioned between ethyl acetate and water, the organic extracts are dried over anhydrous MGSO4 and evaporated in vacuo to afford Benzo [d] ISOXAZOL-6-YL- (6-BROMO- imidazo [1, 2-A] PYRAZIN-8-YL)-AMINE, 828300-70-5

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 828300-70-5

Reference£º
Patent; CELLULAR GENOMICS, INC.; WO2005/5429; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.5-Amino-3-methylbenzo[d]isoxazole, cas is 851768-35-9,the Benzisoxazole compound, introduce a new downstream synthesis route. 851768-35-9

Synthesis of N-(3-methyl-benzo[d]isozazol-5-yl)-4-propyl- benzenesulfonamide, STX875 (KRB01028) :; To a solution of 4n-propylbenzenesulphonyl chloride (124 mg, 0.567 mmol) in dichloromethane (3 rnL) was added pyridine (110 pL, 1.35 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole (80 mg, 0.54 mmol) was added. The resulting mixture was stirred for 3 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a pale pink solid (150 mg, 84%), single spot at Rf 0.62 (1: 1 hexane: ethyl acetate). mp 119.5-120. 0C, HPLC purity 99+% (tR 2.29 min in 10% water-acetonitrile). 1H NMR (CDCI3) : No. 7.57 (2H, d, J=8.4 Hz), 7.40 (1H, d, J=2.2 Hz), 7.37 (1H, d, J=8.8 Hz), 7.20 (2H, d, J=8.4 Hz), 7.10 (1H, dd, J=8.8, 2.2 Hz), 6.71 (1H, s, N-/d), 2.59 (2H, t, J=7.5 Hz), 2.51 (3H, s), 1.59 (2H, sextet, J= 7.5 Hz), 0.88 (3H, t, J=7.5 Hz). LCMS: 314.07 (M- CH3). FAB-MS (MH+, Ci7HisN203S) : calcd 331.1116, found 331.1117

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 851768-35-9, if you are interested., 851768-35-9

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route., 36216-80-5

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CHzClz (10 ml) was stirred at RT. 2-methylpropanoyl chloride (0.0025 mol) was added dropwise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated dry. The residue was further purified by column chromatography over silicagel (eluent: CH2Cl2) yielding 0.235 g of compound 8 and a fraction which was further purified using reversed phase HPLC chromatography on a Xterra MS C18 column (3. 5, um, 4.6 x 100 mm) with a flow rate of 1.6 m ./min (Elution conditions: three mobile phases (mobile phase A 95% 25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min. , to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 7 (Melting Point 130C).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Benzo[d]isoxazol-3-amine.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics