Category: Benzisoxazole

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. A new synthetic method of this compound is introduced below. 36216-80-5

1 ,2-Benzoxazol-3-amine (802 mg, 5.98 mmol) was dissolved in a mixture of anhydrous dichloromethane (4 ml_) and anhydrous pyridine (1 .5 ml_, 19 mmol). To this mixture was added, drop-wise, a solution of ethyl malonyl chloride (1.00 g, 6.64 mmol) in anhydrous dichloromethane (4 ml_). The resulting warm mixture (from slight exotherm) was stirred at ambient temperature for 30 min and quenched with the addition of cold water (20 ml_). Solid sodium carbonate was added until a pH of 10 was reached, and the mixture was stirred at ambient temperature for 1 hour. The organic layer was separated and the aqueous layer back-extracted withdichloromethane (4 x 30 ml_). The combined organic layers were passed through a phase separator column and concentrated under reduced pressured to yield crude ethyl 3-(1 ,2-benzoxazol-3-ylamino)-3- oxopropanoate., 36216-80-5

36216-80-5, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 36216-80-5, you can also browse my other articles.

Reference£º
Patent; TARGACEPT, INC.; MAZUROV, Anatoly A.; MIAO, Lan; SHOWALTER, Todd; WO2013/28587; (2013); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7,the Benzisoxazole compound. A new synthetic method of this compound is introduced below. 651780-27-7

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A.

651780-27-7, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 651780-27-7, you can also browse my other articles.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound, below Introduce a new synthetic route.

BIOS-Na (Compound III) was prepared in accordance with the method described in Example 1 of U.S. Pat. No. 4,172,896. A solution of sodium sulfite (24.3 grams) in water (390 ml) was added to a solution of 3-bromomethyl-1,2-benzisoxazole (24 grams, Compound II) in methanol (390 ml), stirred with heating to 50 C. for 4 hours. After completion of the reaction, the solution was concentrated under reduced pressure. The resulting crystalline residue was heated to about 50-60 C. in methanol (750 ml) and the solution filtered. The clear filtrate was concentrated under reduced pressure and the resulting crystalline residue was washed with diethyl ether to give crystalline sodium 1,2-benzisoxazole-3-methanesulfonate (18 grams, BIOS-Na, Compound III). Thc thus-produced BIOS-Na was analyzed using X-Ray powder diffraction (results depicted in FIG. 1), differential scanning calorimetry (results depicted in FIG. 2) and thermal gravimetry (results depicted in FIG. 3). The water content of the thus-produced BIOS-Na was 7% as measured by Karl-Fischer titration, indicating that the crystals were of BIOS-Na monohydrate.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-(Bromomethyl)benzo[d]isoxazole.

Reference£º
Patent; Naddaka, Vladimir; Adin, Itai; Klopfer, Eyal; Arad, Oded; Kaspi, Joseph; US2006/9644; (2006); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 719-64-2, name is 5-Chloro-3-phenylbenzo[c]isoxazole, introduce a new downstream synthesis route as follows.

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-3-phenylbenzo[c]isoxazole, and friends who are interested can also refer to it.

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route., 36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours when a second portion of benzenesulfonyl chloride was added and stirred for an additional 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and purified either by preparative mass-directed HPLC (up to 50 mg of crude material) or by silica gel column chromatography (0-40% EtOAc/petroleum benzine 40-60 C) to give the desired product. See Table C for reaction components and amounts used as well as purification conditions.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. An updated downstream synthesis route of 36216-80-5 as follows. 36216-80-5

Synthesis of phenyl 1,2-benzisoxazol-3-ylcarbamate; A solution of 1,2-benzisoxazol-3-amine (1.00 g; CAS No.36216-80-5) and triethylamine (1.09 mL) in acetonitrile (5 mL) was added dropwise to at 0 C. solution of phenyl chloroformate (0.989 mL) in THF (20 mL). The reaction was stirred at 0 C. for 1 h and then allowed to warm to room temp overnight. The reaction was diluted with ethyl acetate and washed with 1N HCl and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to room temp, and filtered to give the final product as a tan solid (1.22 g, 64%). m/z 255 (MH+)., 36216-80-5

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 36216-80-5, if you are interested., 36216-80-5

Reference£º
Patent; Pfizer Inc.; US2010/113465; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5-Methylbenzo[d]isoxazol-3-amine, cas is 89976-56-7,the Benzisoxazole compound. An updated downstream synthesis route of 89976-56-7 as follows. 89976-56-7

A solution of 2,4-dimethoxybenzene-1-sulfonyl chloride (0.0799 g, 0.337 mmol) and 5-methylbenzo[d]isoxazol-3-amine I60 (0.050 g, 0.34 mmol) in pyridine (1 ml.) was irradiated in the microwave at 110 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified by column chromatography (12 g S1O2 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C) [205] to yield the title compound (55.0 mg, 42% yield) as a white solid. NMR (400 MHz, CDCb) d 7.86 – 7.82 (m,1H), 7.72 (d, J = 8.81Hz, 1H), 7.37 – 7.28 (m, 2H), 6.49 (d, J = 2.26 Hz, 1H), 6.43 (dd, J = 2.29, 8.82 Hz, 1H), 3.96 (s, 3H), 3.80 (s, 3H), 2.47 (s, 3H). LCMS-A: rt 5.66 min, m/z 348.8 [M+H]+, 347.1 [M-H]

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 89976-56-7, if you are interested., 89976-56-7

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

239097-74-6, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 239097-74-6, name is Benzo[d]isoxazol-5-amine, introduce a new downstream synthesis route as follows.

To a suspension of the ester compound from the procedure above (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of l,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated aHC03to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous a2S04, filtered andconcentrated to provide a residue. The residue was purified by prep-HPLC (MeCN/H20) to provide the title compound (40 mg, 38%) as a white solid.XH NMR (400 MHz, CDC13) delta 10.31 (s, 1H), 8.72-8.71 (m, 2H), 8.45 (d, J= 1.6 Hz, 1H), 7.67 (dd, J= 9.2 Hz, 2.0 Hz, 1H), 7.60 (d, J= 9.2 Hz, 1H), 6.79 (s, 1H), 2.84 (s, 3H), 2.74 (s, 3H). ES-MS m/z: 308.0 [M+H]+. HPLC Purity (214 nm): 98%; tR= 9.36 min.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,239097-74-6,Benzo[d]isoxazol-5-amine,its application will become more common.

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse, Marie Josee; (139 pag.)WO2016/73895; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. 36216-80-5. Here is a downstream synthesis route of the compound 36216-80-5

1 ,2-Benzoxazol-3-amine (802 mg, 5.98 mmol) was dissolved in a mixture of anhydrous dichloromethane (4 ml_) and anhydrous pyridine (1 .5 ml_, 19 mmol). To this mixture was added, drop-wise, a solution of ethyl malonyl chloride (1.00 g, 6.64 mmol) in anhydrous dichloromethane (4 ml_). The resulting warm mixture (from slight exotherm) was stirred at ambient temperature for 30 min and quenched with the addition of cold water (20 ml_). Solid sodium carbonate was added until a pH of 10 was reached, and the mixture was stirred at ambient temperature for 1 hour. The organic layer was separated and the aqueous layer back-extracted withdichloromethane (4 x 30 ml_). The combined organic layers were passed through a phase separator column and concentrated under reduced pressured to yield crude ethyl 3-(1 ,2-benzoxazol-3-ylamino)-3- oxopropanoate.

36216-80-5. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.36216-80-5, if you are interested, you can browse my other articles.

Reference£º
Patent; TARGACEPT, INC.; MAZUROV, Anatoly A.; MIAO, Lan; SHOWALTER, Todd; WO2013/28587; (2013); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 37924-85-9, name is 3-(Bromomethyl)benzo[d]isoxazole, introduce a new downstream synthesis route as follows.

General procedure: To NaOMe (25% soln, 0.5 mL, 2.2 mmol) in MeOH (5 mL) was added thiosemicarbazide 9 (200 mg, 2.2 mmol). Diethyloxalate (0.3 mL, 2.2 mmol) was then added dropwise. The mixture was heated at 65 C for 2 h and then cooled to rt. 1-(Bromomethyl)-4-chlorobenzene (500 mg, 2.4 mmol) was added in one portion; stirring was continued at rt for 3 h and then heated overnight at 50 C. The reaction mixture was concentrated. The residue was dissolved in EtOAc (40 mL), washed with water (20 mL), and brine (20 mL). The organic phase was dried over Na2SO4, concentrated and purified by silica gel column chromatography (EtOAc w/ 0.2% HOAc). The product was triturated in Et2O to afford 59 mg of 6g as a light yellow solid (10% yield)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 37924-85-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Hin, Niyada; Duvall, Bridget; Berry, James F.; Ferraris, Dana V.; Rais, Rana; Alt, Jesse; Rojas, Camilo; Slusher, Barbara S.; Tsukamoto, Takashi; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2088 – 2091;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics