Category: Benzisoxazole

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, it is a common compound, a new synthetic route is introduced below.651780-27-7

651780-27-7, Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 651780-27-7, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 651780-27-7,651780-27-7

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A., 651780-27-7

According to the analysis of related databases, 651780-27-7, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 36216-80-5,Benzo[d]isoxazol-3-amine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.36216-80-5

EXAMPLE 12 3-[(4-pyridinyl)amino]-1,2-benzisoxazole A mixture of 3-amino-1,2-benzisoxazole (9.94 g, 74.18 mmole, prepared according to a method described in G. M. Shutske and K. J. Kapples, J. Heterocyclic Chem., 26, 1293 (1989)), 4-chloropyridine hydrochloride (22.27 g, 197 mmole) and 1-methyl-2-pyrolidinone was stirred vigorously at 130 C. for three hours. The reaction mixture was cooled, diluted with NaHCO3, and extracted with EtOAc, after which the organics were washed with water, dried (MgSO4), and concentrated. The residue was purified by flash chromatography (florisil, EtOAc), and then triturated with diethyl ether to yield 4.04 g (26%) of a fine brown solid. A 2.0 g portion was dissolved in boiling methanol and treated with charcoal (Darco) after which the product crystallized to yield 1.38 g of pale yellow crystals, mp 203 C. (dec.). ANALYSIS: Calculated for C12 H9 N3 O: 68.24% C; 4.29% H; 19.89% N; Found: 68.14% C; 4.12% H; 20.06% N.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Benzo[d]isoxazol-3-amine.

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Incorporated; US5328920; (1994); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5,The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 36216-80-5

EXAMPLE 34 2,6-DICHLORO-N-(3-BENZISOXAZOLYL)BENZAMIDE 3-Aminobenzisoxazole (2 gram), 2,6-dichlorobenzoylchloride (2 gram), and 50 ml. of toluene are heated at reflux for 16 hours. After evaporation of the solvent at reduced pressure, the resultant oily semi-solid is triturated with ether. The solid so formed is then washed with ether and water and constitutes the desired product.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about Benzo[d]isoxazol-3-amine.

Reference£º
Patent; Eli Lilly and Company; US4322429; (1982); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 239097-74-6,Benzo[d]isoxazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 239097-74-6

To a suspension of the ester compound from the procedure above (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of l,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated aHC03to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous a2S04, filtered andconcentrated to provide a residue. The residue was purified by prep-HPLC (MeCN/H20) to provide the title compound (40 mg, 38%) as a white solid.XH NMR (400 MHz, CDC13) delta 10.31 (s, 1H), 8.72-8.71 (m, 2H), 8.45 (d, J= 1.6 Hz, 1H), 7.67 (dd, J= 9.2 Hz, 2.0 Hz, 1H), 7.60 (d, J= 9.2 Hz, 1H), 6.79 (s, 1H), 2.84 (s, 3H), 2.74 (s, 3H). ES-MS m/z: 308.0 [M+H]+. HPLC Purity (214 nm): 98%; tR= 9.36 min.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,239097-74-6,Benzo[d]isoxazol-5-amine,its application will become more common.

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse, Marie Josee; (139 pag.)WO2016/73895; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37924-85-9

3-Bromomethyl-benzo[d]isoxazole-5-sulfonyl chloride Chlorosulfonic acid (1.5 ml, 22 mmol) was slowly added to 3-Bromomethyl-benzo[d]isoxazole (1.0 g, 4.7 mmol) at RT under argon. The reaction was heated at 90 C. for 12 h and then left at RT for 6 h. The resulting viscous oil was quenched over ice, extracted with EtOAc, dried over MgSO4 and concentrated in vacuo to a brown oil (1.17 g, 80% yield).; 3-Bromomethyl-benzo[d]isoxazole-5-sulfonyl chloride Chlorosulfonic acid (1.5 ml, 22 mmol) was slowly added to 3-Bromomethyl-benzo[d]isoxazole (1.0 g, 4.7 mmol) at RT under argon. The reaction was heated at 90 C. for 12 h and then left at RT for 6 h. The resulting viscous oil was quenched over ice, extracted with EtOAc, dried over MgSO4 and concentrated in vacuo to a brown oil (1.17 g, 80% yield). After reaction of this material with the core the aliphatic bromine may be displaced by an appropriate nucleophile., 37924-85-9

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,its application will become more common.

Reference£º
Patent; Sequoia Pharmaceuticals; US2005/267074; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

(21). Iris{dibenzylideneacetoae)dipailadiuffi (123.6 mg, 0.14 mmol, 9.0 MO1%), XantPhos ( 104 mg, 0. 8 mmo’l. 12 moi%), ethyl 6-bromobenzo|d]isoxazole-3-carboxylate (608 mg, 2.25 mmol, 1.5 eq.),l- jX4 raemoxypheny1)me&yI}pyjrazofo^^(381 mg, 1.5 mmol, 1.0 eq.) and cesium carbonate (731 rag, 2.25 mmol. 1 ,5 eq.) were charged in a microwave vial. The vial was evacuated and purged with nitrogen (3X) and 1,4-dioxane (7.5 mL) was added. The reaction mixture was subjected to a microwave reactor tor 140 “C. After 2 h, the reaction mixture was cooled and filtered through a pad of Celite which was washed with EtOAc. Solvents were removed. Purification using reverse phase (Giison HPLC, acidic method (ACN water/0.1% TFA), gradient; 61-91%). Giison fractions were neutralized with sat solo. NaHC:::1.8, 8.8 H IH), 7.48 (dd, ./ – 4.3, 8.6 Hz, l H), 730 (d, J:::8.7 Hz, 2H), 6.88 (ddd, J – 2.9, 4.9, 8.7 Hz, 2H), 5.56 (s, 2H), 4.87 (q, 7.0 Hz, 2H), 3.70 (s, 3H), 1.41 (t, J = 3.2 Hz, 3H). ES-MS GammaMu+l f : 443.3.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

Reference£º
Patent; VANDERBILT UNIVERSITY; CONN, P. Jeffrey; HOPKINS, Corey R.; LINDSLEY, Craig W.; NISWENDER, Colleen M.; ENGERS, Darren W.; PANARESE, Joe; BOLLINGER, Sean; ENGERS, Julie; (157 pag.)WO2016/115282; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2 A common heterocyclic compound, 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The preparation method is as follows: 5-chloro-3-phenyl 2,1-benzisoxazole (commercially available) (0.3 mmol, 68.7 mg), phenylacetaldehyde (0.6 mmol, 72.0 mg), copper powder (0.06) Methanol, 3.8 mg) and silver triflate (0.03 mmol, 8.0 mg) were added to a 25 ml Schlenk tube, and the reaction tube was replaced with oxygen three times under reduced pressure.Hexafluoroisopropanol (2 ml) was added and stirred at 110 C for 30 hours.After completion of the reaction, a column chromatography of silica gel of 100-200 mesh was added, and the solvent was evaporated under reduced pressure. The crude product was subjected to silica gel column chromatography, eluting with petroleum ether and ethyl acetate ( petroleum ether: ethyl acetate = 20:1) The liquid was eluted, and the elution was carried out by TLC elution. The eluate containing the desired product was collected, and the desired product eluent was combined and evaporated to give the quinoline compound of the formula i above, yield 69%. This material is a red solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 719-64-2 reaction routes.

Reference£º
Patent; Jiangnan University; Zou Lianghua; Zhu Hao; Zhu Shuai; Li Pinggui; Yan Cheng; (12 pag.)CN110204486; (2019); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.37924-85-9

Step 1 : A mixture of tert-butyl methyl((25′)-l-oxo-l-(4-oxo-2′,3′,4,5,5′,6′-hexahydro-3H- spiro[benzo[][l,4]oxazepine-2,4′-pyran]-3-ylamino)propan-2-yl)carbamate (156 mg, 360 muetaiotaomicron), 3-(bromomethyl)benzo[d]isoxazole (83.9 mg, 396 muetaiotaomicron), Cs2C03 (141 mg, 432 muetaiotaomicron) and Nal (64.7 mg, 432 muiotaetaomicron) in DMF (900 mu) was stirred at RT for 18 h, diluted with EtOAc, washed with H20, brine, dried over Na2S04, filtered, and the filtrate concentrated to give a residue that was purified by silica gel chromatography. The resulting material was purified by supercritical fluid chromatography (SFC) to provide tert-butyl (5)-l-((5)-5-(benzo[ ]isoxazol-3-ylmethyl)-4- oxo-2′,3^4,5,5^6′-hexahydro-3H-spiro|enzo[][l,4]oxazepine-2,4′-pyran]-3-ylamino)-l- oxopropan-2-yl(methyl)carbamate (54.5 mg, 27 %) as a white foam.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-(Bromomethyl)benzo[d]isoxazole.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DONNELL, Andrew F.; HAN, Xiaochun; KESTER, Robert Francis; KONG, Norman; LE, Kang; LOU, Yan; MICHOUD, Christophe; MOLITERNI, John Anthony; REMISZEWSKI, Stacy; RUPERT, Kenneth Carey; YUN, Weiya; WO2014/23708; (2014); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 36216-80-5,Benzo[d]isoxazol-3-amine, as follows.36216-80-5

(Synthesis of X-4) In a three-neck flask, after filling the inside of flask with nitrogen gas, 6.5 g of 10% Pd-C (produced by Wako Pure Chemical Industries, Ltd.) was added, and 2,000 mL of ethanol and the entire amount of the crude product of Compound (X-3) obtained above were further added. The resulting mixture was heated/refluxed, and 55 mL (3 molar equivalents) of formic acid was slowly added dropwise thereto, followed by stirring at this temperature for 5 hours. The resulting reaction mixture was cooled to an inner temperature of 25C and then subjected to Celite filtration and to the mother solution separated by filtration, 105 g of 1,5-naphthalenedisulfonic acid was added. After raising the inner temperature to 70C, the mixture was stirred for 30 minutes and then gradually cooled to room temperature, and the crystal was separated by filtration to obtain 100 g of Compound (X-4). The yield was 72% based on Compound (X-1) as the starting material. The obtained crystal was pale brown. 1H NMR (deuterated DMSO): delta6.95-6.98 (1H), delta7.02-7.04 (1H), delta7.40-7.51 (3H), delta7.90-7.95 (1H), delta8.75 (1H), delta8.85-8.88 (2H), delta9.03 (2H), delta10.89 (1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 36216-80-5, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; FUJIFILM Corporation; EP2460799; (2012); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics