Benzisoxazole | Page 618 of 644 | Heterocyclic Building Blocks-Benzisoxazole

Some scientific research about Benzo[d]isoxazol-3-amine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

36216-80-5 A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Example 148: N-(benzo[d]isoxazol-3-yl)-2,4-dimethoxybenzenesulfonamide 148 A solution of 2,4-dimethoxybenzenesulfonyl chloride (0.18 g, 0.75 mmol) and benzo[d]isoxazol-3-amine (0.10 g, 0.75 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified twice by column chromatography (4 g Si02 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C then 4g Si02 cartridge, 0-35% EtOAc in petroleum benzine 40-60 C) to yield two batches (78 mg and 5 mg) of [183] the title compound (total mass 83 mg, 33 % yield) as white solids. 1H NMR (400 MHz, CDCI3) d 8.1 1 (d, J = 8.05 Hz, 1H), 7.79 (s, 1H), 7.70 (d, J = 8.81Hz, 1H), 7.57 – 7.50 (m, 1H), 7.47 – 7.40 (m, 1H), 7.37 – 7.29 (m, 1H), 6.50 (d, J = 2.27 Hz, 1H), 6.42 (dd, J = 2.25, 8.81Hz, 1H), 3.98 (s, 3H), 3.81 (s, 3H). LCMS-B: rt 3.20 min, m/z = 356.8 [M+Na]+, 334.8 [M+H]+., 36216-80-5

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of 5-Methylbenzo[d]isoxazol-3-amine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,89976-56-7,5-Methylbenzo[d]isoxazol-3-amine,its application will become more common.

A common heterocyclic compound, 89976-56-7,5-Methylbenzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 89976-56-7

89976-56-7, A solution of 2,4-dimethoxybenzene-1-sulfonyl chloride (0.0799 g, 0.337 mmol) and 5-methylbenzo[d]isoxazol-3-amine I60 (0.050 g, 0.34 mmol) in pyridine (1 ml.) was irradiated in the microwave at 110 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified by column chromatography (12 g S1O2 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C) [205] to yield the title compound (55.0 mg, 42% yield) as a white solid. NMR (400 MHz, CDCb) d 7.86 – 7.82 (m,1H), 7.72 (d, J = 8.81Hz, 1H), 7.37 – 7.28 (m, 2H), 6.49 (d, J = 2.26 Hz, 1H), 6.43 (dd, J = 2.29, 8.82 Hz, 1H), 3.96 (s, 3H), 3.80 (s, 3H), 2.47 (s, 3H). LCMS-A: rt 5.66 min, m/z 348.8 [M+H]+, 347.1 [M-H]

Some scientific research about 3-(Bromomethyl)benzo[d]isoxazole

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,its application will become more common.

37924-85-9 A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 37924-85-9

A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37924-85-9

The origin of a common compound about 5-Methylbenzo[d]isoxazol-3-amine

To a solution of 5-methyl-benzo[d]isoxazol-3-ylamine (4.6 g) in anhydrous DCM (50 mL) was slowly added a solution of (Boc)2O in anhydrous DCM (50 mL) and 50 mg of DMAP. After refluxing overnight, TLC showed complete reaction. LCMS/ELSD showed formation of the desired product (M+H: 349.2). The reaction was quenched with aqueous sodium carbonate (1 M, 50 mL) and stirred for 1 hr at room temperature. The organic layer was dried over anhydrous sodium sulfate. After rotary evaporation of most solvent, the concentrated solution was loaded onto a 50 g ISOLUTE silica cartridge and eluted with EtOAc/Hexane (from 1:10 to 1:2). Rotary evaporation of solvent provided a light yellow solid. Trituration with EtOAc/Hexane (1:9) provided a white solid (4.56 g). 1H-NMR (300 MHz, CDCl3) delta 7.47 (d, 1H), 7.40 (d, 1H), 7.37 (s, 1H), 2.48 (s, 3H), 1.41 (s, 18H). LC/MS (ESI): M+H+ 349.2.

Reference£º
Patent; Player, Mark R.; Lu, Tianbao; Hu, Huaping; Zhu, Xizhen; Teleha, Christopher; Kreutter, Kevin; US2007/225282; (2007); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

New downstream synthetic route of 28691-49-8

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,6-Chlorobenzo[d]isoxazole-3-carboxylic acid,28691-49-8,its application will become more common.

A common heterocyclic compound, 28691-49-8,6-Chlorobenzo[d]isoxazole-3-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 28691-49-8

Example 54 (6-Chlorobenzo[d]isoxazol-3-yl)(2-methyl-3-phenyl-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)methanone To a solution of 6-chlorobenzo[d]isoxazole-3-carboxylic acid (52 mg, 0.263 mmol) in dichloromethane (600 muL) was added N,N-dimethylformamide (10 muL, 0.13 mmol, 0.948 g/mL) and oxalyl chloride (25 muL, 0.287 mmol, 1.45 g/mL) at 0 C. The reaction mixture was stirred at 0 C. for 5 min. To the reaction mixture was added 2-methyl-3-phenyl-4,5,6,7-tetrahydropyrazolo[3,4-c]pyridine, Intermediate 1 (55 mg, 0.258 mmol) at 0 C. The reaction mixture was allowed to warm to room temperature and stirred for 18 h. The reaction mixture was diluted with water (2 mL) and extracted with ethyl acetate (2*5 mL). The combined organic layers were washed with 10% potassium bisulfate (1*5 mL), 1 M sodium carbonate (1*5 mL) and brine (1*5 mL), dried over magnesium sulfate, filtered and evaporated. The residue was purified by reverse phase HPLC to afford the title compound (14 mg, 0.036 mmol, 13%) as an off-white powder. MS (ESI): mass calcd. for C21H17ClN4O2, 392.1; m/z found, 393.1 [M+H]+. 1H NMR (500 MHz, DMSO-d6) delta 8.15-8.12 (m, 1H), 7.96 (d, J=8.5 Hz, 1H), 7.58-7.42 (m, 6H), 4.86 (s, 2H), 3.88-3.83 (m, 2H), 3.79 (s, 3H), 2.67-2.60 (m, 2H)., 28691-49-8

Reference£º
Patent; Janssen Pharmaceutica NV; Ameriks, Michael K.; Chen, Gang; Huang, Chaofeng; Laforteza, Brian Ngo; Ravula, Suchitra; Southgate, Emma Helen; Zhang, Wei; US2020/102303; (2020); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of 719-64-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,its application will become more common.

A common heterocyclic compound, 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 719-64-2

719-64-2, (3) According to a mass ratio of 30:2:0.08:1.7, methanol, 5-chloro-3-phenyl-2,1benzisoxazole, palladium-carbon catalyst, and ammonium formate were mixed and heated to reflux at 50C for 2 hours. After allowing to cool to room temperature, the mixture was filtered, and the resulting residue was vacuum dried at 50C for 4 hours to obtain 2-amino-5-chlorobenzophenone.

Reference£º
Patent; Shanxi Jujiehan Chemical Co., Ltd.; Li Changying; (5 pag.)CN107698453; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of 651780-27-7

651780-27-7, 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0. 081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A. Literature reference: Angell, R. M.; Baldwin, I. R.; Bamborough, P.; Deboeck, N. M.; Longstaff, T.; Swanson, S. W004010995A1 The following acid was prepared using this method: 1,2-Benzisoxazole-3-carboxylic acid.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/63767; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about 36216-80-5

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by mass directed preparative HPLC to give the desired product. See Table B for reaction components and amounts used., 36216-80-5