Category: Benzisoxazole

5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2, it is a common heterocyclic compound, the Benzisoxazole compound, its synthesis route is as follows.,719-64-2

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

As the rapid development of chemical substances, we look forward to future research findings about 719-64-2

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Benzo[d]isoxazol-5-amine, cas is 239097-74-6, it is a common heterocyclic compound, the Benzisoxazole compound, its synthesis route is as follows.,239097-74-6

Synthesis of N-benzofdlisoxazol-5-yl-4-propyl-benzenesulfonamide, STX 919 (KRB01047) :; To a solution of 4n-propylbenzenesulphonyl chloride (171 mg, 0.783 mmol) in dichloromethane (4 mL) was added pyridine (150 uL, 1.86 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-1, 2-benzisoxazole (100 mg, 0.746 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (10 mL) was added and the mixture was extracted into ethyl acetate (20 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (170 mg, 72%), single spot at Rf 0.68 (1: 1 hexane: ethyl acetate). mp 130.0- 130. 6C, HPLC purity 99+% (tR 2.44 min in 10% water-acetonitrile).’H NMR (CDCI3) : No. 8.62 (1H, d, J=1.0 Hz), 7.60 (2H, d, J=8.4 Hz), 7.48 (2H, m), 7.19 (3H, m), 6.86 (1H, s, N-H), 2.58 (2H, t, J=7.5 Hz), 1.58 (2H, sextet, J=7.4 Hz), 0.88 (3H, t, J=7.4 Hz). LCMS: 315.14 (M-). FAB-MS (MH+, deHOsS) : calcd 317.0960, found 317.0962

As the rapid development of chemical substances, we look forward to future research findings about 239097-74-6

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Benzo[d]isoxazol-5-amine, cas is 239097-74-6, it is a common heterocyclic compound, the Benzisoxazole compound, its synthesis route is as follows.,239097-74-6

Synthesis of N-benzofdlisoxazol-5-vl-2, 5-dichloro-benzenesulfonamide, STX 920 (KRB01048):; To a solution of 2, 5-dichlorobenzenesulphonyl chloride (192 mg, 0.783 mmol) in dichloromethane (4 mL) was added pyridine (150 uL, 1.86 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-1, 2-benzisoxazole (100 mg, 0.746 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (10 mL) was added and the mixture was extracted into ethyl acetate (20 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (174 mg, 68%), single spot at Rf 0.68 (1: 1 hexane: ethyl acetate). mp 172.9- 173. 6C, HPLC purity 99+% (tR 2.41 min in 10% water-acetonitrile).’H NMR (CDCI3) : 5 8.64 (1H, s), 7.89 (1H, d, J=2.2 Hz), 7.56-7. 28 (5H, m). LCMS: 341.07 (M-). FAB-MS (MH+, C13H8Cl2N2O3S) : calcd 342.9711, found 342.9710.

As the rapid development of chemical substances, we look forward to future research findings about 239097-74-6

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7, it is a common heterocyclic compound, the Benzisoxazole compound, its synthesis route is as follows.,651780-27-7

10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0. 081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A. Literature reference: Angell, R. M.; Baldwin, I. R.; Bamborough, P.; Deboeck, N. M.; Longstaff, T.; Swanson, S. W004010995A1 The following acid was prepared using this method: 1,2-Benzisoxazole-3-carboxylic acid.

As the rapid development of chemical substances, we look forward to future research findings about 651780-27-7

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/63767; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.,36216-80-5

EXAMPLE 34 2,6-DICHLORO-N-(3-BENZISOXAZOLYL)BENZAMIDE 3-Aminobenzisoxazole (2 gram), 2,6-dichlorobenzoylchloride (2 gram), and 50 ml. of toluene are heated at reflux for 16 hours. After evaporation of the solvent at reduced pressure, the resultant oily semi-solid is triturated with ether. The solid so formed is then washed with ether and water and constitutes the desired product.

As the paragraph descriping shows that 36216-80-5 is playing an increasingly important role.

Reference£º
Patent; Eli Lilly and Company; US4322429; (1982); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9, it is a common heterocyclic compound, the Benzisoxazole compound, its synthesis route is as follows.,37924-85-9

3-Bromomethyl-benzo[d]isoxazole-5-sulfonyl chloride Chlorosulfonic acid (1.5 ml, 22 mmol) was slowly added to 3-Bromomethyl-benzo[d]isoxazole (1.0 g, 4.7 mmol) at RT under argon. The reaction was heated at 90 C. for 12 h and then left at RT for 6 h. The resulting viscous oil was quenched over ice, extracted with EtOAc, dried over MgSO4 and concentrated in vacuo to a brown oil (1.17 g, 80% yield).; 3-Bromomethyl-benzo[d]isoxazole-5-sulfonyl chloride Chlorosulfonic acid (1.5 ml, 22 mmol) was slowly added to 3-Bromomethyl-benzo[d]isoxazole (1.0 g, 4.7 mmol) at RT under argon. The reaction was heated at 90 C. for 12 h and then left at RT for 6 h. The resulting viscous oil was quenched over ice, extracted with EtOAc, dried over MgSO4 and concentrated in vacuo to a brown oil (1.17 g, 80% yield). After reaction of this material with the core the aliphatic bromine may be displaced by an appropriate nucleophile.

With the rapid development of chemical substances, we look forward to future research findings about 3-(Bromomethyl)benzo[d]isoxazole

Reference£º
Patent; Sequoia Pharmaceuticals; US2005/267074; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Name is 6-Chlorobenzo[d]isoxazole-3-carboxylic acid, as a common heterocyclic compound, it belongs to Benzisoxazole compound, and cas is 28691-49-8, its synthesis route is as follows.

Example 54 (6-Chlorobenzo[d]isoxazol-3-yl)(2-methyl-3-phenyl-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)methanone To a solution of 6-chlorobenzo[d]isoxazole-3-carboxylic acid (52 mg, 0.263 mmol) in dichloromethane (600 muL) was added N,N-dimethylformamide (10 muL, 0.13 mmol, 0.948 g/mL) and oxalyl chloride (25 muL, 0.287 mmol, 1.45 g/mL) at 0 C. The reaction mixture was stirred at 0 C. for 5 min. To the reaction mixture was added 2-methyl-3-phenyl-4,5,6,7-tetrahydropyrazolo[3,4-c]pyridine, Intermediate 1 (55 mg, 0.258 mmol) at 0 C. The reaction mixture was allowed to warm to room temperature and stirred for 18 h. The reaction mixture was diluted with water (2 mL) and extracted with ethyl acetate (2*5 mL). The combined organic layers were washed with 10% potassium bisulfate (1*5 mL), 1 M sodium carbonate (1*5 mL) and brine (1*5 mL), dried over magnesium sulfate, filtered and evaporated. The residue was purified by reverse phase HPLC to afford the title compound (14 mg, 0.036 mmol, 13%) as an off-white powder. MS (ESI): mass calcd. for C21H17ClN4O2, 392.1; m/z found, 393.1 [M+H]+. 1H NMR (500 MHz, DMSO-d6) delta 8.15-8.12 (m, 1H), 7.96 (d, J=8.5 Hz, 1H), 7.58-7.42 (m, 6H), 4.86 (s, 2H), 3.88-3.83 (m, 2H), 3.79 (s, 3H), 2.67-2.60 (m, 2H).

With the complex challenges of chemical substances, we look forward to future research findings about 6-Chlorobenzo[d]isoxazole-3-carboxylic acid

Reference£º
Patent; Janssen Pharmaceutica NV; Ameriks, Michael K.; Chen, Gang; Huang, Chaofeng; Laforteza, Brian Ngo; Ravula, Suchitra; Southgate, Emma Helen; Zhang, Wei; US2020/102303; (2020); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is 5-Chloro-3-phenylbenzo[c]isoxazole, and cas is 719-64-2, its synthesis route is as follows.

That is, using the above conditions, Aldimine 1a (54.7mg, 0.2mmol, 100mol%),[RhCp * Cl2] 2 (3.1mg, 0.005mmol, 2.5mol%), AgSbF6 (6.9mg, 0.02mmol, 10mol%),Then in an oven dried and sealed tube filled with PivOH (10.2mg, 0.1mmol, 50mol%),Under room temperature and air, anthranyl 2a (68.9 mg, 0.3 mmol, 200 mol%) and DMF (1 mL) were added.The reaction mixture was stirred at 120 C. for 6 hours and cooled to room temperature.The reaction mixture was diluted with EtOAc (3 mL) and concentrated in vacuo.The residue was purified by flash column chromatography (n-hexane / EtOAc = 7: 1) to give 3a (48.2 mg) in 73% yield.

719-64-2 is used more and more widely, we look forward to future research findings about 5-Chloro-3-phenylbenzo[c]isoxazole

Reference£º
Patent; SUNGKYUNKWAN University Research & Business Foundation; Kim In-su; Kim Hyeong-sik; (41 pag.)KR2020/25255; (2020); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As a common heterocyclic compound, it belongs to Benzisoxazole compound, name is 5-Methylbenzo[d]isoxazol-3-amine, and cas is 89976-56-7, its synthesis route is as follows.

A solution of 2,4-dimethoxybenzene-1-sulfonyl chloride (0.0799 g, 0.337 mmol) and 5-methylbenzo[d]isoxazol-3-amine I60 (0.050 g, 0.34 mmol) in pyridine (1 ml.) was irradiated in the microwave at 110 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified by column chromatography (12 g S1O2 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C) [205] to yield the title compound (55.0 mg, 42% yield) as a white solid. NMR (400 MHz, CDCb) d 7.86 – 7.82 (m,1H), 7.72 (d, J = 8.81Hz, 1H), 7.37 – 7.28 (m, 2H), 6.49 (d, J = 2.26 Hz, 1H), 6.43 (dd, J = 2.29, 8.82 Hz, 1H), 3.96 (s, 3H), 3.80 (s, 3H), 2.47 (s, 3H). LCMS-A: rt 5.66 min, m/z 348.8 [M+H]+, 347.1 [M-H]

With the complex challenges of chemical substances, we look forward to future research findings about 89976-56-7,belong Benzisoxazole compound

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Benzo[d]isoxazol-3-amine, cas is 36216-80-5, it is a common heterocyclic compound, the Benzisoxazole compound, its synthesis route is as follows.

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours when a second portion of benzenesulfonyl chloride was added and stirred for an additional 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and purified either by preparative mass-directed HPLC (up to 50 mg of crude material) or by silica gel column chromatography (0-40% EtOAc/petroleum benzine 40-60 C) to give the desired product. See Table C for reaction components and amounts used as well as purification conditions.

With the rapid development of chemical substances, we look forward to future research findings about Benzo[d]isoxazol-3-amine

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics