Heterocyclic Building Blocks-Benzisoxazole

36216-80-5, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route.

Synthesis of phenyl 1,2-benzisoxazol-3-ylcarbamate; A solution of 1,2-benzisoxazol-3-amine (1.00 g; CAS No.36216-80-5) and triethylamine (1.09 mL) in acetonitrile (5 mL) was added dropwise to at 0 C. solution of phenyl chloroformate (0.989 mL) in THF (20 mL). The reaction was stirred at 0 C. for 1 h and then allowed to warm to room temp overnight. The reaction was diluted with ethyl acetate and washed with 1N HCl and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to room temp, and filtered to give the final product as a tan solid (1.22 g, 64%). m/z 255 (MH+).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about Benzo[d]isoxazol-3-amine.

Reference£º
Patent; Pfizer Inc.; US2010/113465; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 719-64-2, name is 5-Chloro-3-phenylbenzo[c]isoxazole, introduce a new downstream synthesis route as follows. 719-64-2

The preparation method is as follows: 5-chloro-3-phenyl 2,1-benzisoxazole (commercially available) (0.3 mmol, 68.7 mg), phenylacetaldehyde (0.6 mmol, 72.0 mg), copper powder (0.06) Methanol, 3.8 mg) and silver triflate (0.03 mmol, 8.0 mg) were added to a 25 ml Schlenk tube, and the reaction tube was replaced with oxygen three times under reduced pressure.Hexafluoroisopropanol (2 ml) was added and stirred at 110 C for 30 hours.After completion of the reaction, a column chromatography of silica gel of 100-200 mesh was added, and the solvent was evaporated under reduced pressure. The crude product was subjected to silica gel column chromatography, eluting with petroleum ether and ethyl acetate ( petroleum ether: ethyl acetate = 20:1) The liquid was eluted, and the elution was carried out by TLC elution. The eluate containing the desired product was collected, and the desired product eluent was combined and evaporated to give the quinoline compound of the formula i above, yield 69%. This material is a red solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 719-64-2 reaction routes.

Reference£º
Patent; Jiangnan University; Zou Lianghua; Zhu Hao; Zhu Shuai; Li Pinggui; Yan Cheng; (12 pag.)CN110204486; (2019); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 5-Amino-3-methylbenzo[d]isoxazole, cas is 851768-35-9,the Benzisoxazole compound, below Introduce a new synthetic route., 851768-35-9

Synthesis of N-(3-methyl-benzo[d]isozazol-5-yl)-4-propyl- benzenesulfonamide, STX875 (KRB01028) :; To a solution of 4n-propylbenzenesulphonyl chloride (124 mg, 0.567 mmol) in dichloromethane (3 rnL) was added pyridine (110 pL, 1.35 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole (80 mg, 0.54 mmol) was added. The resulting mixture was stirred for 3 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a pale pink solid (150 mg, 84%), single spot at Rf 0.62 (1: 1 hexane: ethyl acetate). mp 119.5-120. 0C, HPLC purity 99+% (tR 2.29 min in 10% water-acetonitrile). 1H NMR (CDCI3) : No. 7.57 (2H, d, J=8.4 Hz), 7.40 (1H, d, J=2.2 Hz), 7.37 (1H, d, J=8.8 Hz), 7.20 (2H, d, J=8.4 Hz), 7.10 (1H, dd, J=8.8, 2.2 Hz), 6.71 (1H, s, N-/d), 2.59 (2H, t, J=7.5 Hz), 2.51 (3H, s), 1.59 (2H, sextet, J= 7.5 Hz), 0.88 (3H, t, J=7.5 Hz). LCMS: 314.07 (M- CH3). FAB-MS (MH+, Ci7HisN203S) : calcd 331.1116, found 331.1117

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 5-Amino-3-methylbenzo[d]isoxazole.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, introduce a new downstream synthesis route. 36216-80-5

Example 77; (3R)-1-[2-(1,2-Benzisoxazol-3-ylamino)-2-oxoethyl]-3-{[2-piperidin-1-yl-2-(2-thienyl)propanoyl]oxy}-1-azoniabicyclo[2.2.2]octane chloride (Isomer 1); a) N-1,2-Benzisoxazol-3-yl-2-chloroacetamide; Benzo[d]isoxazol-3-amine (1 g) and cesium carbonate (2.429 g) in dry DMF (20 mL) was stirred at 23 C. whilst bromoacetyl chloride (0.624 mL) was added dropwise to the mixture. After stirring for 8 h, the reaction was poured into water (100 mL) and the mixture extracted with diethyl ether (2¡Á200 mL). The combined extracts were dried over magnesium sulfate and concentrated to dryness. The crude product was purified on silica gel using 40% ether isohexane. The subtitled compound was isolated as a colourless solid (0.5 g).m/e 210 [M+H]+ 1H NMR (400 MHz, DMSO) delta 11.45 (1H, s), 8.02 (1H, d), 7.72-7.63 (2H, m), 7.39 (1H, ddd), 4.47 (2H, s).

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 36216-80-5, if you are interested., 36216-80-5

Reference£º
Patent; Ford, Rhonan; Mete, Antonio; Millichip, Ian; Teobald, Barry; US2010/113510; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound, below Introduce a new synthetic route., 719-64-2

A, in a reaction vessel equipped with a stirrer, a reflux condenser, 5-chloro-3-phenyl-benzisoxazole 0.26 mol, the mass fraction of 30% 2-bromo-5-fluoronitrobenzene solution 390ml, nickel chloride powder 0.46 mol, control the stirring speed at 190 rpm, raise the solution temperature to 78 C, reflux reaction 120 min; B, adding 90% of 4-chlorophenethylamine solution with a mass fraction of 21% slowly add the ethylene glycol dimethyl ether solution with a mass fraction of 37% adding time to control at 110min, continue to reflux reaction 5h. C, add the mass fraction of 27% sodium bicarbonate solution 200ml, reduce the solution temperature to 16 C, molecular sieve bleaching, filtration, the filtrate was concentrated, again lowering the solution temperature to 5 C, the mass fraction of 70% triethylamine solution washing, calcium oxide dehydrating agent dehydration, to give crystals of 2-amino-5-chlorobenzophenone 55.59 g, yield 92%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 719-64-2.

Reference£º
Patent; Chengdu Qiesite Technology Co., Ltd.; Peng Fei; (9 pag.)CN106083621; (2016); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, below Introduce a new synthetic route.

Phenyl 1 ,2-benzisoxazol-3-ylcarbamateA solution of 1 ,2-benzisoxazol-3-amine (1.00 g; CASNo. 36216-80-5) and triethylamine (1.09 ml_) in acetonitrile (5 ml_) was added dropwise to at 0 0C solution of phenyl chloroformate (0.989 ml_) in THF (20 ml_). The reaction was stirred at 0 0C for 1 h and then allowed to warm to RT overnight. The reaction was diluted with ethyl acetate and washed with 1 N HCI and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to RT, and filtered to give final product as a tan solid (1.22 g, 64%). m/z 255 (MH+).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 36216-80-5, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; PFIZER INC.; LONG, Scott Allen; MEYERS, Marvin Jay; PELC, Matthew James; SCHWEITZER, Barbara Ann; THORARENSEN, Atli; WANG, Lijuan Jane; WO2010/58318; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

89976-56-7, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.5-Methylbenzo[d]isoxazol-3-amine, cas is 89976-56-7,the Benzisoxazole compound, below Introduce a new synthetic route.

To a solution of 5-methyl-benzo[d]isoxazol-3-ylamine (4.6 g) in anhydrous DCM (50 mL) was slowly added a solution of (Boc)2O in anhydrous DCM (50 mL) and 50 mg of DMAP. After refluxing overnight, TLC showed complete reaction. LCMS/ELSD showed formation of the desired product (M+H: 349.2). The reaction was quenched with aqueous sodium carbonate (1 M, 50 mL) and stirred for 1 hr at room temperature. The organic layer was dried over anhydrous sodium sulfate. After rotary evaporation of most solvent, the concentrated solution was loaded onto a 50 g ISOLUTE silica cartridge and eluted with EtOAc/Hexane (from 1:10 to 1:2). Rotary evaporation of solvent provided a light yellow solid. Trituration with EtOAc/Hexane (1:9) provided a white solid (4.56 g). 1H-NMR (300 MHz, CDCl3) delta 7.47 (d, 1H), 7.40 (d, 1H), 7.37 (s, 1H), 2.48 (s, 3H), 1.41 (s, 18H). LC/MS (ESI): M+H+ 349.2.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 89976-56-7.

Reference£º
Patent; Player, Mark R.; Lu, Tianbao; Hu, Huaping; Zhu, Xizhen; Teleha, Christopher; Kreutter, Kevin; US2007/225282; (2007); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

One of the major reasons is to use measurements of the macroscopic properties of a system, 36216-80-5, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, introduce a new downstream synthesis route.

Example 148: N-(benzo[d]isoxazol-3-yl)-2,4-dimethoxybenzenesulfonamide 148 A solution of 2,4-dimethoxybenzenesulfonyl chloride (0.18 g, 0.75 mmol) and benzo[d]isoxazol-3-amine (0.10 g, 0.75 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified twice by column chromatography (4 g Si02 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C then 4g Si02 cartridge, 0-35% EtOAc in petroleum benzine 40-60 C) to yield two batches (78 mg and 5 mg) of [183] the title compound (total mass 83 mg, 33 % yield) as white solids. 1H NMR (400 MHz, CDCI3) d 8.1 1 (d, J = 8.05 Hz, 1H), 7.79 (s, 1H), 7.70 (d, J = 8.81Hz, 1H), 7.57 – 7.50 (m, 1H), 7.47 – 7.40 (m, 1H), 7.37 – 7.29 (m, 1H), 6.50 (d, J = 2.27 Hz, 1H), 6.42 (dd, J = 2.25, 8.81Hz, 1H), 3.98 (s, 3H), 3.81 (s, 3H). LCMS-B: rt 3.20 min, m/z = 356.8 [M+Na]+, 334.8 [M+H]+.

36216-80-5. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.36216-80-5, if you are interested, you can browse my other articles.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

One of the major reasons is to use measurements of the macroscopic properties of a system, 37924-85-9, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound, introduce a new downstream synthesis route.

General procedure: To NaOMe (25% soln, 0.5 mL, 2.2 mmol) in MeOH (5 mL) was added thiosemicarbazide 9 (200 mg, 2.2 mmol). Diethyloxalate (0.3 mL, 2.2 mmol) was then added dropwise. The mixture was heated at 65 C for 2 h and then cooled to rt. 1-(Bromomethyl)-4-chlorobenzene (500 mg, 2.4 mmol) was added in one portion; stirring was continued at rt for 3 h and then heated overnight at 50 C. The reaction mixture was concentrated. The residue was dissolved in EtOAc (40 mL), washed with water (20 mL), and brine (20 mL). The organic phase was dried over Na2SO4, concentrated and purified by silica gel column chromatography (EtOAc w/ 0.2% HOAc). The product was triturated in Et2O to afford 59 mg of 6g as a light yellow solid (10% yield)

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 37924-85-9

Reference£º
Article; Hin, Niyada; Duvall, Bridget; Berry, James F.; Ferraris, Dana V.; Rais, Rana; Alt, Jesse; Rojas, Camilo; Slusher, Barbara S.; Tsukamoto, Takashi; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2088 – 2091;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

One of the major reasons is to use measurements of the macroscopic properties of a system, 36216-80-5, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, introduce a new downstream synthesis route.

(2) Bis(2,2,2-trichloroethyl) 1,2-benzisoxazol-3-ylimidodicarbonate; To a solution of 1,2-benzisoxazol-3-amine (4.00 g, 29.8 mmol) and pyridine (7.25 ml, 89.6 mmol) in tetrahydrofuran (100 ml) was added under ice-cooling, 2,2,2-trichloroethyl chloroformate (8.20 ml, 59.6 mmol), and the mixture was stirred under ice-cooling for 1 hour and at room temperature for 20 minutes. The reaction mixture was poured to water and extracted with ethyl acetate. The extract was washed with water and dried over anhydrous magnesium sulfate, and the solvent was distilled off under reduced pressure. To the residue was added hexane to give 13.3 g (91.7%) of the desired product as a solid. 1H-NMR (CDCl3) delta; 4.82 (4H, s), 7.36 – 7.44 (1H, m), 7.59 – 7.65 (3H, m).

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 36216-80-5

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP1813606; (2007); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics