Heterocyclic Building Blocks-Benzisoxazole

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. A new synthetic method of this compound is introduced below. 36216-80-5

36216-80-5, EXAMPLE 7 N-[2-(4-Morpholinyl)ethyl]-1,2-benzisoxazol-3-amine To a solution of 3-amino-1,2-benzisoxazole (3.5 g) in N,N-dimethylformamide (DMF) (100 ml) was added sodium hydride (0.8 g) under nitrogen. The reaction was stirred one hour at ambient temperature. A solution of 4-(2-chloroethyl)morpholine (4.0 g) in DMF (50 ml) was added followed by heating to 120 C. for one hour. TLC (5% MeOH/DCM) analysis revealed the absence of starting material. The reaction was quenched with water and extracted with EtOAc. The organic layer was washed with water, dried (MgSO4), and concentrated in vacuo. Flash column chromatography (silica gel) eluding with 1.5-2.5% MeOH/DCM afforded the product (2.5 g), m.p. 79-80 C. ANALYSIS: Calculated for C13 H17 N3 O2: 63.14%C 6.93%H 16.99%N Found: 63.47%C 6.87%H 16.95%N

36216-80-5, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 36216-80-5

Reference£º
Patent; Hoechst-Roussel Pharmaceutical Incorporated; US5494908; (1996); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 36216-80-5

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C)., 36216-80-5

The chemical industry reduces the impact on the environment during synthesis, 36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours when a second portion of benzenesulfonyl chloride was added and stirred for an additional 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and purified either by preparative mass-directed HPLC (up to 50 mg of crude material) or by silica gel column chromatography (0-40% EtOAc/petroleum benzine 40-60 C) to give the desired product. See Table C for reaction components and amounts used as well as purification conditions.

36216-80-5. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.36216-80-5, if you are interested, you can browse my other articles.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

16263-54-0, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.3,6-Dichlorobenzo[d]isoxazole, cas is 16263-54-0,the Benzisoxazole compound, below Introduce a new synthetic route.

3,6-dichlorobenzisoxazole (5.2 g, 27.8 mmol) and piperazine anhydride (24 g, 278 mmol) were placed in an eggplant type flask and reacted at 120 C. for 24 hours. After completion of the reaction, 52 ml of ice water was added to quench , Add 15 ml of 50% NaOH solution to the solution, stir for 5 minutes, extract with 30 ml * 3 dichloromethane, combine dichloromethane layer, wash with saturated brine 20 ml, dehydrate with anhydrous MgSO 4, evaporate to dryness, Isolated by alumina (200-300 mesh) column chromatography eluting with dichloromethane: methanol = 100: 1 to obtain 4.7 g of 6-chloro-3-piperazinyl-benzisoxazole, Yield is 71%.

According to the analysis of related databases, 3,6-Dichlorobenzo[d]isoxazole, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; JIANGSU HENGYI PHARMACEUTICAL COMPANY LIMITED; SHANGHAI INSTITUTE OF PHARMACEUTICAL INDUSTRY; Li, JIANQI; PENG, SHAOPING; CAI, WANGPING; GAO, KAI; (39 pag.)JP5714152; (2015); B2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 36216-80-5

General procedure: To a stirred solution of pyridin-2-amine (1.0 g, 10.6 mmol) and pyridine (1.01 mL, 12.7 mmol) in THF (35 mL) was added 2,2,2- trichloroethyl chloroformate (1.76 mL, 12.7 mmol) dropwise at 0 C. The mixture was stirred at 0 C for 1.5 h, poured into water, and extracted with EtOAc. The organic layer was washed with water, dried over anhydrous MgSO4, and concentrated in vacuo. The residue was triturated with Et2O-hexane to give 36 (1.76 g, 62%) as a colorless powder.

36216-80-5. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.36216-80-5, if you are interested, you can browse my other articles.

Reference£º
Article; Kono, Mitsunori; Matsumoto, Takahiro; Kawamura, Toru; Nishimura, Atsushi; Kiyota, Yoshihiro; Oki, Hideyuki; Miyazaki, Junichi; Igaki, Shigeru; Behnke, Craig A.; Shimojo, Masato; Kori, Masakuni; Bioorganic and Medicinal Chemistry; vol. 21; 1; (2013); p. 28 – 41;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.3,6-Dichlorobenzo[d]isoxazole, cas is 16263-54-0,the Benzisoxazole compound, below Introduce a new synthetic route., 16263-54-0

5) Preparation 6-chloro-3-piperazinyl-benzisoxazole 3,6-dichlorobenzisoxazole (5.2g, 27.8 mmol), and anhydrous piperazine (24g, 278 mmol) are placed in an egg type flask and react at 120C for 24 hours. After completion of the reaction, 52 ml of an ice-water mixture is added for quenching the reaction. Further 15 ml of 50% NaOH solution is added to the reaction solution. The reaction solution is stirred for 5 minutes and extracted with dichloromethane (30ml*3). The dichloromethane layer is combined, washed with 20 ml of saturated saline, dried over anhydrous MgSO4, evaporated to dryness, and subjected to a separation on a column of alumina (200-300mesh), eluting with dichloromethane_methanol=100:1, to obtain 4.7g of 6-chloro-3-piperazinyl-benzisoxazole, with a yield of 71%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,6-Dichlorobenzo[d]isoxazole, and friends who are interested can also refer to it.

Reference£º
Patent; Jiangsu Guohua Investment Co., Ltd; Shanghai Institute of Pharmaceutical Industry; EP2322520; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.3,6-Dichlorobenzo[d]isoxazole, cas is 16263-54-0,the Benzisoxazole compound. 16263-54-0. Here is a downstream synthesis route of the compound 16263-54-0

To a solution of l-Boc-5-trifluoromethoxybenzimidazole-2-one (5 g, 15.7 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (3.0 g, 15.7 mmol) and Cs2CO3 (11 g, 31.4 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and extracted with ethyl acetate (2×20 ml). The organic extracts were combined, dried over anhydrous Mg2SO4, and concentrated to dryness. The residue was purified by silica gel column chromatography using hexane/ethyl acetate (4:1) as solvent system. Fractions containing earlier eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-5- trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.54 (d, J=8.5, IH), 7.14 (d, J=8.5, IH), 7.13 (s, IH). Fractions containing later eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-6-trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.66 (brs, IH), 7.54 (d, J=8.5, IH), 7.13 (brs, IH).

16263-54-0. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.16263-54-0, if you are interested, you can browse my other articles.

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7,the Benzisoxazole compound, below Introduce a new synthetic route.

To a mixture of ethyl 6-bromobenzisoxazole-3-carboxylate (2.0 g, 7.4 mmol) and t- butyl 5-cyanoanthranilate (1.62 g, 7.4 mmol) in toluene (27 [ML)] is added NaH (1.5 g of a 60% mineral oil dispersion, 3.8 mmol) under N2. The reaction mixture is stirred overnight at rt. This mixture is diluted with aq 1 N [HCI,] extracted with EtOAc (0.2 L). The EtOAc solution is dried and concentrated to give Preparation Pb as a solid : 1H NMR (300 MHz, CDC13) [8] 12.8 (1H), 9.05 [(1H),] 8.38 (1H), 8.18 (1H), 7.92 (1H), 7.82 (1H), 7.61 [(1H),] [1.] 69 [(9H).]

According to the analysis of related databases, Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5-Amino-3-methylbenzo[d]isoxazole, cas is 851768-35-9,the Benzisoxazole compound. 851768-35-9. Here is a downstream synthesis route of the compound 851768-35-9

Synthesis of 2, 5-dichloro-N- (3-methvl-benzofdlisozazol-5-vl)- benzenesulfonamide, STX 876 (KRB01030) :; To a solution of 2, 5-dichlorobenzenesulphonyl chloride (105 mg, 0.428 mmol) in dichloromethane (3 mL) was added pyridine (100 pL, 1.02 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole (60 mg, 0.41 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a yellow solid (100 mg, 68%), single spot at Rf 0.62 (1: 1 hexane: ethyl acetate). mp 229.4-230. 0C, HPLC purity 94% (tR 2.18 min in 10% water-acetonitrile).’H NMR (CDC13) : 6 7.89 (1H, d, J=2.2 Hz), 7.43 (4H, m), 7.22 (1H, m), 7.09 (1H, s, N-H), 2.54 (3H, s). LCMS: 340.06 (M-CH3). FAB-MS (MH+, C14H10CI2N203S) : calcd 356.9867, found 356.9860

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 851768-35-9

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 651780-27-7, name is Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, introduce a new downstream synthesis route as follows. 651780-27-7

To a mixture of ethyl 6-bromobenzisoxazole-3-carboxylate (2.0 g, 7.4 mmol) and t- butyl 5-cyanoanthranilate (1.62 g, 7.4 mmol) in toluene (27 [ML)] is added NaH (1.5 g of a 60% mineral oil dispersion, 3.8 mmol) under N2. The reaction mixture is stirred overnight at rt. This mixture is diluted with aq 1 N [HCI,] extracted with EtOAc (0.2 L). The EtOAc solution is dried and concentrated to give Preparation Pb as a solid : 1H NMR (300 MHz, CDC13) [8] 12.8 (1H), 9.05 [(1H),] 8.38 (1H), 8.18 (1H), 7.92 (1H), 7.82 (1H), 7.61 [(1H),] [1.] 69 [(9H).]

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 651780-27-7, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics