Heterocyclic Building Blocks-Benzisoxazole

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 89976-56-7,5-Methylbenzo[d]isoxazol-3-amine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.89976-56-7

A solution of 2,4-dimethoxybenzene-1-sulfonyl chloride (0.0799 g, 0.337 mmol) and 5-methylbenzo[d]isoxazol-3-amine I60 (0.050 g, 0.34 mmol) in pyridine (1 ml.) was irradiated in the microwave at 110 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified by column chromatography (12 g S1O2 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C) [205] to yield the title compound (55.0 mg, 42% yield) as a white solid. NMR (400 MHz, CDCb) d 7.86 – 7.82 (m,1H), 7.72 (d, J = 8.81Hz, 1H), 7.37 – 7.28 (m, 2H), 6.49 (d, J = 2.26 Hz, 1H), 6.43 (dd, J = 2.29, 8.82 Hz, 1H), 3.96 (s, 3H), 3.80 (s, 3H), 2.47 (s, 3H). LCMS-A: rt 5.66 min, m/z 348.8 [M+H]+, 347.1 [M-H]

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 5-Methylbenzo[d]isoxazol-3-amine.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2,A common heterocyclic compound, 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

The chemical industry reduces the impact on the environment during synthesis, 719-64-2,5-Chloro-3-phenylbenzo[c]isoxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

239097-74-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.239097-74-6,Benzo[d]isoxazol-5-amine, it is a common compound, a new synthetic route is introduced below.

Synthesis of N-benzofdlisoxazol-5-vl-3-chloro-2-methvl- benzenesulfonamide, STX 918 (KRB01046):; To a solution of 3-chloro-2-methylbenzenesulphonyl chloride (176 mg, 0.783 mmol) in dichloromethane (4 mL) was added pyridine (150 iuL, 1.86 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-1, 2-benzisoxazole [27] (100 mg, 0.746 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (10 mL) was added and the mixture was extracted into ethyl acetate (20 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (178 mg, 74%), single spot at Rf 0.69 (1: 1 hexane: ethyl acetate). mp 111.9-112. 4C, HPLC purity 97% (tR 2.44 min in 10% water-acetonitrile).’H NMR (CDCl3) : No. 8.62 (1H, d, J=1.0 Hz), 7.81 (1H, dd, J=7.9, 1.2 Hz), 7.55 (1H, dd, J=7.9, 1.0 Hz), 7.45 (2H, m), 7.17 (2H, m), 6.77 (1H, s, N-I), 2.72 (3H, s). LCMS: 321.01 (M-). FAB-MS (MH+, C14H11CIN203S) : calcd 323.0257, found 323.0271

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 239097-74-6, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 36216-80-5,Benzo[d]isoxazol-3-amine, as follows.36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by mass directed preparative HPLC to give the desired product. See Table B for reaction components and amounts used., 36216-80-5

According to the analysis of related databases, Benzo[d]isoxazol-3-amine, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, as follows.37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.Step 1: To a 0C solution of -4:1 mixture of tert-butyl (S)-1-((S)-1-(benzo[djisoxazol-3- ylmethyl)-2-oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1,41 diazepin-3 -ylamino)- 1 -oxopropan-2- yl(methyl)carbamate and tert-butyl (S)-i -((S)-i -(benzo[dlisoxazol-3-ylmethyl)-4-oxo-2,3 ,4,5- tetrahydro- 1 H-benzo [bI [1 ,4ldiazepin-3-ylamino)- 1 -oxopropan-2-yl(methyl)carbamate (209.4 mg, 424 tmol) in CH2C12 (4.24 mL) was added pyridine (343 tL, 4.24 mmol), followed by methyl 4-(chlorocarbonyl)benzoate (92.7 mg, 467 tmol). After 1 h at 0 C the mixture was diluted with H20 and extracted with CH2C12. The combined extracts were washed with 1 N aq. citric acid, sat. aq. NaHCO3, and brine, dried over Na2504, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide methyl 4-((S)-5-(benzo[djisoxazol-3 -ylmethyl)-3 -((S)-2-(tert-butoxycarbonyl(methyl)amino) propanamido)-4-oxo-2,3 ,4,5 -tetrahydro- 1 Hbenzo[b l[1,4ldiazepine-1-carbonyl)benzoate (194 mg, 70 %) as a white solid. LC-MS mlz 678 [M+Naj .

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 37924-85-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3-(Bromomethyl)benzo[d]isoxazole,37924-85-9, This compound has unique chemical properties. The synthetic route is as follows.,37924-85-9

(b) Sodium hydride (50% in mineral oil, 3.4 g, 0.071 mole) is washed free of mineral oil with hexane (3*30 mL) and suspended in dimethylformamide (100 mL). This suspension is well stirred and maintained near room temperature (water bath) during the dropwise addition of a solution of imidazole (4.8 g, 0.071 mole) in dimethylformamide (25 mL). The reaction mixture is stirred at room temperature for 1 hour when 3-bromomethyl-1,2-benzisoxazole (15.0 g, 0.071 mole) is added all at once. The mixture is then heated at 85 C. for 8 hours. The solvent is evaporated in vacuo and the residue is taken up in methylene chloride (200 mL) and washed with water (3*50 mL). The organic solution is dried over anhydrous sodium sulfate, filtered and evaporated to give 3-[(1H-imidazol-1-yl)methyl]-1,2-benzisoxazole, which is purified by recrystallisation from isopropanol, m.p. 52-55 C.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 37924-85-9.

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. Benzo[d]isoxazol-6-amine,828300-70-5, This compound has unique chemical properties. The synthetic route is as follows.,828300-70-5

A quantity of 0.13 g (1 mmole) OF BENZO [d] isoxazol-6-ylamine is treated with 0.27 g (1 mmole) of 6, 8-Dibromo-imidazo [1, 2-a] pyrazine in acetonitrile with 3 eq. OF K2C03 AT REFLUX for 16 hrs. The reaction mixture is cooled partitioned between ethyl acetate and water, the organic extracts are dried over anhydrous MGSO4 and evaporated in vacuo to afford Benzo [d] ISOXAZOL-6-YL- (6-BROMO- imidazo [1, 2-A] PYRAZIN-8-YL)-AMINE

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 828300-70-5.

Reference£º
Patent; CELLULAR GENOMICS, INC.; WO2005/5429; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5 A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Under nitrogen benzo [d] isoxazol-3-amine (3.6g, 26.8mmol) was dissolved in chlorosulfonic acid (15.0mL), heated to 60 stirred overnight.Cooled to room temperature, ice water (20 mL), suction filtered, the filter cake was dried at 60 deg.] C under vacuum to give a white solid (5.0g, 87%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 36216-80-5 reaction routes.

Reference£º
Patent; Guangdong East sunshine Pharmaceutical Co; Zuo, Yinglin; Zheng, Jinfu; Wen, Liang; Zhang, Min; Wu, Shoutao; Yuan, Xiaofeng; Lin, Runfeng; Wang, Xiaojun; Zhang, Yingjun; (27 pag.)CN104530046; (2016); B;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, it is a common compound, a new synthetic route is introduced below.

Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A., 651780-27-7

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 651780-27-7, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 851768-35-9,5-Amino-3-methylbenzo[d]isoxazole, as follows.851768-35-9

Synthesis of 2, 5-dichloro-N- (3-methvl-benzofdlisozazol-5-vl)- benzenesulfonamide, STX 876 (KRB01030) :; To a solution of 2, 5-dichlorobenzenesulphonyl chloride (105 mg, 0.428 mmol) in dichloromethane (3 mL) was added pyridine (100 pL, 1.02 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole (60 mg, 0.41 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a yellow solid (100 mg, 68%), single spot at Rf 0.62 (1: 1 hexane: ethyl acetate). mp 229.4-230. 0C, HPLC purity 94% (tR 2.18 min in 10% water-acetonitrile).’H NMR (CDC13) : 6 7.89 (1H, d, J=2.2 Hz), 7.43 (4H, m), 7.22 (1H, m), 7.09 (1H, s, N-H), 2.54 (3H, s). LCMS: 340.06 (M-CH3). FAB-MS (MH+, C14H10CI2N203S) : calcd 356.9867, found 356.9860

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 851768-35-9, and friends who are interested can also refer to it.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics