Heterocyclic Building Blocks-Benzisoxazole

A new synthetic route of Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,its application will become more common.

A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 651780-27-7

Toluene (40 mL) was added to a flask containing ethyl [6-BROM-1,] 2-benzisoxazole-3-carboxylate (3.15 g, 11.7 mmol), tetrakis (triphenylphosphine) palladium [(0)] (835 mg, 0.723 mmol, Strem), cesium carbonate (4.12 g, 12.6 mmol, Aldrich), and 2- (trifluoromethyl) phenylboronic acid (2. [38] g, 12.5 mmol, Aldrich) under argon. This mixture was heated in a 100 C oil bath for 35 hours. The mixture was diluted with EtOAc (250 mL) and washed with 4: 1 water: brine (250 [ML)] followed by brine (250 mL). The organics were filtered through a [1″PLUG] of silica gel and evaporated. Product was split in two, adsorbed onto silica gel, and purified on Biotage Flash 40 M+ silica cartridges using 20% EtOAc in heptane. Yield was 2.08 g of orange solid. [‘H] NMR (400 MHz, DMSO-d6) [5] ppm 1.42 (t, [J=7.] 15 Hz, 3 H) 4.51 (q, [J=7.] 05 Hz, 2 H) 7.52 (d, J=7. 46 Hz, [1] H) 7.51 (d, [J=8.] 09 Hz, 1 H) 7.71 (t, J=7. 57 Hz, [1] H) 7.79 (t, [J=7.] 36 Hz, 1 H) 7.91 (d, [J=7.] 67 Hz, [1] [H)] 7.93 (s, 1 H) 8.14 (d, J=8. 09 Hz, 1 H).

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 36216-80-5

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used., 36216-80-5

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 37924-85-9

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,its application will become more common.

A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about Benzo[d]isoxazol-3-amine

36216-80-5 A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of triethylamine (0. 0025 mol) in CH2Cl2 (5 ml) benzoylchloride (0.0025 mol) was added. The mixture stirred at RT and intermediate 3 (0.0025 mol) in CH2C12 (5 ml) added dropwise. The reaction mixture was stirred overnight at RT. The mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was purified by column chromatography over silicagel (eluent CH2Cl2) yielding O. OlOg compound 9 (yield of 2%, Melting Point 133C) and a fraction which was further purified by column chromatography over silicagel (eluent hexane/CH2Cl2) yielding 0.225 g of compound 10 (yield of 38%, Melting Point 97C-100C), and 0.100 g of compound 11 (yield of 17%, Melting Point 154C-160C).

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 36216-80-5

Under nitrogen benzo [d] isoxazol-3-amine (3.6g, 26.8mmol) was dissolved in chlorosulfonic acid (15.0mL), heated to 60 stirred overnight.Cooled to room temperature, ice water (20 mL), suction filtered, the filter cake was dried at 60 deg.] C under vacuum to give a white solid (5.0g, 87%).

Reference£º
Patent; Guangdong East sunshine Pharmaceutical Co; Zuo, Yinglin; Zheng, Jinfu; Wen, Liang; Zhang, Min; Wu, Shoutao; Yuan, Xiaofeng; Lin, Runfeng; Wang, Xiaojun; Zhang, Yingjun; (27 pag.)CN104530046; (2016); B;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about 3-(Bromomethyl)benzo[d]isoxazole

37924-85-9 A common heterocyclic compound, 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

EXAMPLE 18A mixture of 18a (20 mg, 0.060 mmol), 18b (12.7 mg, 0.060 mmol), and potassium carbonate (24.8 mg, 0.18 mmol) in DMF (1 ml) was heated at 50 C for 2h. The reaction solution was purified on RP-HPLC using 10-100% acetonitrile (0.05%TFA) to give 18 as the TFA salt.’HNMR (acetonitrile-d3, 500 MHz) delta = 8.047-8.031 (dd, J = 8.1Hz, IH), 7.738-7.723 (m, 2H), 7.503-7.452 (m, IH), 7.448 (s, IH), 7.399-7.321 (m, 5H), 7.067-7.052 (dd, J – 7.5Hz, IH), 6.173 (s, IH), 4.755 (s, 2H), 3.736-3.701(m, 2H), 3.550-3.450 (m, 2H), 2.800-2.745 (m5 IH), 2.4Gamma3- 2.404 (m, IH), 2.141-2.1 10 (m, IH), 2.036-2.001 (m IH); m z: calcd. for C26H22Cl2N202:465.37; found [M+H+]: 465.00; 466.94.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; DING, FA-Xiang; JIANG, Jinlong; SHEN, Dong-Ming; SHEN, Hong; SHI, Zhi-Cai; WO2011/137024; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 16263-54-0

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,16263-54-0,3,6-Dichlorobenzo[d]isoxazole,its application will become more common.

A common heterocyclic compound, 16263-54-0,3,6-Dichlorobenzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 16263-54-0

To a solution of benzimidazole-2-one (Aldrich, 1.1 g, 7.5 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (1.5 g, 7.5 mmol) and Cs2CO3 (4.8 g, 15 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and stirred in a ice bath for 2 hours. The mixture was then filtered. The solid was washed with water and dried under high vacuum to obtain 2.0 g (93%) of a yellow solid as l-(6-chlorobenzisoxazol-3-yl)benzimidazole-2-one. To a solution of the above product (1.0 g, 3.5 mmol) in DMF (15 ml) was added NaOMe solution in methanol (30% wt/wt, 10 ml). The mixture was heated to 8O0C under vacuum to remove residual methanol and then stirred at 11O0C under nitrogen overnight. The mixture was then cooled to room temperature, diluted with water (50 ml), adjusted to pH 6 with 10% aqueous HCl. The resulting suspension was stirred in an ice bath for 2 hours and filtered. The solid was washed with water and dried in an oven (900C) for 2 hours and then under high vacuum at room temperature for 3 hours to obtain a slightly yellow solid. LC-MS m/e: (M+ 1) = 282, 16263-54-0

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about 3-(Bromomethyl)benzo[d]isoxazole

The origin of a common compound about 651780-27-7

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate

20a) Ethyl 6-(4-hydroxyphenyl)-l,2-benzisoxazole-3-carboxylateEthyl 6-bromo-l,2-benzisoxazole-3-carboxylate (0.34 g, 1.26 mmol), (4- hydroxyphenyl)boronic acid (0.21, 1.51 mmol), tetrakis(triphenylphosphine)palladium (0) (0.06 g, 0.05 mmol) and 2 M sodium carbonate (5 mL) in 1 ,2-dimethoxyethane (6 mL) were stirred at 80 0C for 1 hour. The reaction mixture was diluted with water, followed by ethyl acetate. The layers were separated and the ethyl acetate layer was washed with brine, dried over magnesium sulfate, filtered, and concentrated to afford the crude material. The crude material was purified using hexanes: ethyl acetate (0 to 40% ethyl acetate) to afford a mixture of desired product, plus the free acid of the desired product, 6-(4-hydroxyphenyl)-l,2- benzisoxazole-3-carboxylic acid. All the fractions were combined and concentrated. The mixture was then dissolved in ethanol. Thionyl chloride was added, and the reaction mixture was reflux for 8 days. The reaction mixture was cooled to room temperature and concentrated. The concentrated material was diluted with 5% sodium bicarbonate, and extracted with ethyl acetate. The ethyl acetate layer was washed with water followed by brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified using hexanes: ethyl acetate (0 to 100% ethyl acetate) to afford 0.044 g (13%) of ethyl 6-(4-hydroxyphenyl)- 1 ,2-benzisoxazole-3- carboxylate. 1H NMR (400 MHz, d6-DMSO): delta 9.76 (s, IH), 8.05 (m, 2H), 7.79 (dd, J = 8, 1 Hz, IH), 7.65 (d, J = 9 Hz, 2H), 6.88 (d, J = 9 Hz, 2H), 4.47 (q, J = 7 Hz, 2H), 1.39 (t, J = 7 Hz, 3H).

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157270; (2008); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics