Heterocyclic Building Blocks-Benzisoxazole

651780-27-7, Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Toluene (40 mL) was added to a flask containing ethyl [6-BROM-1,] 2-benzisoxazole-3-carboxylate (3.15 g, 11.7 mmol), tetrakis (triphenylphosphine) palladium [(0)] (835 mg, 0.723 mmol, Strem), cesium carbonate (4.12 g, 12.6 mmol, Aldrich), and 2- (trifluoromethyl) phenylboronic acid (2. [38] g, 12.5 mmol, Aldrich) under argon. This mixture was heated in a 100 C oil bath for 35 hours. The mixture was diluted with EtOAc (250 mL) and washed with 4: 1 water: brine (250 [ML)] followed by brine (250 mL). The organics were filtered through a [1″PLUG] of silica gel and evaporated. Product was split in two, adsorbed onto silica gel, and purified on Biotage Flash 40 M+ silica cartridges using 20% EtOAc in heptane. Yield was 2.08 g of orange solid. [‘H] NMR (400 MHz, DMSO-d6) [5] ppm 1.42 (t, [J=7.] 15 Hz, 3 H) 4.51 (q, [J=7.] 05 Hz, 2 H) 7.52 (d, J=7. 46 Hz, [1] H) 7.51 (d, [J=8.] 09 Hz, 1 H) 7.71 (t, J=7. 57 Hz, [1] H) 7.79 (t, [J=7.] 36 Hz, 1 H) 7.91 (d, [J=7.] 67 Hz, [1] [H)] 7.93 (s, 1 H) 8.14 (d, J=8. 09 Hz, 1 H).

As the paragraph descriping shows that 651780-27-7 is playing an increasingly important role.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.89976-56-7,5-Methylbenzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

A solution of 2,4-dimethoxybenzene-1-sulfonyl chloride (0.0799 g, 0.337 mmol) and 5-methylbenzo[d]isoxazol-3-amine I60 (0.050 g, 0.34 mmol) in pyridine (1 ml.) was irradiated in the microwave at 110 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified by column chromatography (12 g S1O2 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C) [205] to yield the title compound (55.0 mg, 42% yield) as a white solid. NMR (400 MHz, CDCb) d 7.86 – 7.82 (m,1H), 7.72 (d, J = 8.81Hz, 1H), 7.37 – 7.28 (m, 2H), 6.49 (d, J = 2.26 Hz, 1H), 6.43 (dd, J = 2.29, 8.82 Hz, 1H), 3.96 (s, 3H), 3.80 (s, 3H), 2.47 (s, 3H). LCMS-A: rt 5.66 min, m/z 348.8 [M+H]+, 347.1 [M-H]

89976-56-7 5-Methylbenzo[d]isoxazol-3-amine 18679292, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.239097-74-6,Benzo[d]isoxazol-5-amine,as a common compound, the synthetic route is as follows.

To a suspension of intermediate ester (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of 1,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated NaHCO3 to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous Na2SO4, filtered and concentrated. The residue was purified by trituration in DCM/Et2O, collected by filtration, and dried in vacuo to give the title compound (50 mg, 48%) as a yellow solid.1H NMR (400 MHz, CDCl3): delta 10.05 (s, 1H), 8.72 (s, 1H), 8.55 (s, 1H), 8.07 (s, 1H), 7.68 (dd, J = 6.8 Hz, 1.6 Hz, 1H), 7.59 (d, J = 6.8 Hz, 1H), 6.59 (s, 1H), 2.71 (s, 3H), 2.70 (s, 3H). LC-MS m/z: 308.1 [M+H+]. HPLC Purity (214 nm): 98%; tR = 8.38 min.

239097-74-6 Benzo[d]isoxazol-5-amine 18373421, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse Marie, Josee; (134 pag.)WO2016/73889; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, Benzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To prepare a-5, a-4 (2.1 g, 0.015 mol) was added to chlorosulfonic acid (4.1 ml, 0.060 mol) at room temperature (RT). Said reaction mixture was stirred overnight under an inert atmosphere such as nitrogen at 60C. The mixture was then poured in ice/water. The precipitate was filtered and dried with toluene in a Buchi-apparatus (2.1 g, yield 60%).

As the paragraph descriping shows that 36216-80-5 is playing an increasingly important role.

Reference£º
Patent; TIBOTEC PHARMACEUTICALS LTD; WO2003/97616; (2003); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Diethyl malonate (12.6 g, 79 mmol) was added to a suspension of sodium hydride (3.16 g, 132 mmol) in dimethylsulfoxide (60 ml) over 30 min. The temperature of the reaction rose to 60 C and the mixture clarified. 1,4-Dibromo-2-nitrobenzene (10 g, 36.0 mmol) was added and the solution was maintained for 2 h at 100 C. The reaction mixture was allowed to cool to rt and was poured into ice (300g-400g). The precipitated solids were isolated by filtration and dried to provide 11.0 g of the product (89%). The ester (11.0 g, 32.0 mmol) was diluted with a 2 N solution of sodium hydroxide (32 mL, 63 mmol) and the reaction mixture was maintained at room temperature for 16 h. The aqueous layer was extracted with dichloromethane (20 mL) and was acidified. The precipitated solids were isolated by filtration and dried to provide 7.00 g of the acid (89%). Sulfuric acid (1 mL) was added to a solution of the acid (7.00 g, 27.0 mmol) in ethanol (60 ml). The reaction mixture was warmed to reflux, maintained for 2 h, and was concentrated under reduce pressure. The residue was partitioned between ethyl acetate (250 mL) and saturated sodium carbonate (50 mL) and the organic layer was washed with saturated sodium carbonate (50 mL) and brine (50 mL). The organic layer was dried (sodium sulfate) and concentrated to provide 8.00 g (98%) of the ester as a liquid. Under N2 atmosphere, sodium ethylate was formed with sodium (33.5 g, 1.46 mol) in ethanol (1.0 L). Isoamylnitrite (225 mL) was added to a solution of the ester (420 g, 1.46 mol) in ethanol (3 L) in a 10 L three-necked round bottom flask and the mixture was warmed to 60 C. A solution of sodium ethoxide, prepared from sodium metal (33.5 g, 1.46 mmol) in ethanol (1 L) was added dropwise and the reaction mixture was maintained for 2 h. The reaction mixture was allowed to cool to rt and was neutralized with 2 N hydrochloric acid. The reaction mixture was extracted with ethyl acetate (4 x 2L) and the combined organic layers were washed with water (2 x 1 L) and brine (2 x 1 L) and dried (sodium sulfate). The residue was purified by chromatography (1/1 to 0/1 hexane/ethyl acetate) to provide 110 g of the product ( 28%). 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0.081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed’by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was- dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with 1,4-diazabicyclo[3.2.2]nonane according to procedure A.

The synthetic route of 651780-27-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/111038; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A.

As the paragraph descriping shows that 651780-27-7 is playing an increasingly important role.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

1 ,2-Benzoxazol-3-amine (802 mg, 5.98 mmol) was dissolved in a mixture of anhydrous dichloromethane (4 ml_) and anhydrous pyridine (1 .5 ml_, 19 mmol). To this mixture was added, drop-wise, a solution of ethyl malonyl chloride (1.00 g, 6.64 mmol) in anhydrous dichloromethane (4 ml_). The resulting warm mixture (from slight exotherm) was stirred at ambient temperature for 30 min and quenched with the addition of cold water (20 ml_). Solid sodium carbonate was added until a pH of 10 was reached, and the mixture was stirred at ambient temperature for 1 hour. The organic layer was separated and the aqueous layer back-extracted withdichloromethane (4 x 30 ml_). The combined organic layers were passed through a phase separator column and concentrated under reduced pressured to yield crude ethyl 3-(1 ,2-benzoxazol-3-ylamino)-3- oxopropanoate.

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; TARGACEPT, INC.; MAZUROV, Anatoly A.; MIAO, Lan; SHOWALTER, Todd; WO2013/28587; (2013); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37924-85-9,3-(Bromomethyl)benzo[d]isoxazole,as a common compound, the synthetic route is as follows.

BIOS-Na (Compound III) was prepared in accordance with the method described in Example 1 of U.S. Pat. No. 4,172,896. A solution of sodium sulfite (24.3 grams) in water (390 ml) was added to a solution of 3-bromomethyl-1,2-benzisoxazole (24 grams, Compound II) in methanol (390 ml), stirred with heating to 50 C. for 4 hours. After completion of the reaction, the solution was concentrated under reduced pressure. The resulting crystalline residue was heated to about 50-60 C. in methanol (750 ml) and the solution filtered. The clear filtrate was concentrated under reduced pressure and the resulting crystalline residue was washed with diethyl ether to give crystalline sodium 1,2-benzisoxazole-3-methanesulfonate (18 grams, BIOS-Na, Compound III). Thc thus-produced BIOS-Na was analyzed using X-Ray powder diffraction (results depicted in FIG. 1), differential scanning calorimetry (results depicted in FIG. 2) and thermal gravimetry (results depicted in FIG. 3). The water content of the thus-produced BIOS-Na was 7% as measured by Karl-Fischer titration, indicating that the crystals were of BIOS-Na monohydrate.

As the paragraph descriping shows that 37924-85-9 is playing an increasingly important role.

Reference£º
Patent; Naddaka, Vladimir; Adin, Itai; Klopfer, Eyal; Arad, Oded; Kaspi, Joseph; US2006/9644; (2006); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

851768-35-9, 5-Amino-3-methylbenzo[d]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Synthesis of 2, 5-dichloro-N- (3-methvl-benzofdlisozazol-5-vl)- benzenesulfonamide, STX 876 (KRB01030) :; To a solution of 2, 5-dichlorobenzenesulphonyl chloride (105 mg, 0.428 mmol) in dichloromethane (3 mL) was added pyridine (100 pL, 1.02 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole (60 mg, 0.41 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a yellow solid (100 mg, 68%), single spot at Rf 0.62 (1: 1 hexane: ethyl acetate). mp 229.4-230. 0C, HPLC purity 94% (tR 2.18 min in 10% water-acetonitrile).’H NMR (CDC13) : 6 7.89 (1H, d, J=2.2 Hz), 7.43 (4H, m), 7.22 (1H, m), 7.09 (1H, s, N-H), 2.54 (3H, s). LCMS: 340.06 (M-CH3). FAB-MS (MH+, C14H10CI2N203S) : calcd 356.9867, found 356.9860

The synthetic route of 851768-35-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,as a common compound, the synthetic route is as follows.

10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0. 081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A. Literature reference: Angell, R. M.; Baldwin, I. R.; Bamborough, P.; Deboeck, N. M.; Longstaff, T.; Swanson, S. W004010995A1 The following acid was prepared using this method: 1,2-Benzisoxazole-3-carboxylic acid.

As the paragraph descriping shows that 651780-27-7 is playing an increasingly important role.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/63767; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics