Tag: M.W:100-200

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 239097-74-6, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Benzo[d]isoxazol-5-amine, cas is 239097-74-6,the Benzisoxazole compound. A new synthetic method of this compound is introduced below.

Synthesis of N-benzofdlisoxazol-5-yl-4-propyl-benzenesulfonamide, STX 919 (KRB01047) :; To a solution of 4n-propylbenzenesulphonyl chloride (171 mg, 0.783 mmol) in dichloromethane (4 mL) was added pyridine (150 uL, 1.86 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-1, 2-benzisoxazole (100 mg, 0.746 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (10 mL) was added and the mixture was extracted into ethyl acetate (20 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (170 mg, 72%), single spot at Rf 0.68 (1: 1 hexane: ethyl acetate). mp 130.0- 130. 6C, HPLC purity 99+% (tR 2.44 min in 10% water-acetonitrile).’H NMR (CDCI3) : No. 8.62 (1H, d, J=1.0 Hz), 7.60 (2H, d, J=8.4 Hz), 7.48 (2H, m), 7.19 (3H, m), 6.86 (1H, s, N-H), 2.58 (2H, t, J=7.5 Hz), 1.58 (2H, sextet, J=7.4 Hz), 0.88 (3H, t, J=7.4 Hz). LCMS: 315.14 (M-). FAB-MS (MH+, deHOsS) : calcd 317.0960, found 317.0962, 239097-74-6

239097-74-6, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 239097-74-6, you can also browse my other articles.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. 36216-80-5. Here is a downstream synthesis route of the compound 36216-80-5

To a stirred solution of 1-(3-phenyl-1,2,4-thiadiazol-5-yl)piperidine- 4-carboxylic acid (289 mg, 1.00 mmol) and DMF (0.010 mL) in THF (5.0 mL) was added oxalyl chloride (0.174 mL, 2.00 mmol) dropwise at 0 C. After stirring at room temperature for 1 h, the solvent was concentrated in vacuo. To the residue were added THF (5.0 mL), benzo[d]isoxazol-3-amine (134 mg, 1.00 mmol), and pyridine (0.404 mL, 5.00 mmol) at 0 C. The mixture was stirred at room temperature for 1.0 h, and the solvent was concentrated in vacuo. The residue was purified by silica gel column chromatography (hexane-EtOAc), and recrystallized from EtOAc- hexane to give 65a (60.3 mg, 15%) as colorless crystals, mp 204- 205 C. 1H NMR (300 MHz, CDCl3) d: 2.05-2.22 (4H, m), 2.88 (1H, bs), 3.36-3.45 (2H, m), 4.11-4.18 (2H, m), 7.32-7.63 (6H, m), 8.19-8.27 (3H, m), 9.46 (1H, br s). Analytical HPLC showed 97.4% purity.

36216-80-5. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.36216-80-5, if you are interested, you can browse my other articles.

Reference£º
Article; Kono, Mitsunori; Matsumoto, Takahiro; Kawamura, Toru; Nishimura, Atsushi; Kiyota, Yoshihiro; Oki, Hideyuki; Miyazaki, Junichi; Igaki, Shigeru; Behnke, Craig A.; Shimojo, Masato; Kori, Masakuni; Bioorganic and Medicinal Chemistry; vol. 21; 1; (2013); p. 28 – 41;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. A new synthetic method of this compound is introduced below. 36216-80-5

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CH2C12 (10 ml) was stirred at RT. Phenylacetylchloride (0.0025 mol) was added drop wise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was crystallized in isopropanol. Yielding 0.210 g compound 5 (yield of 84%), melting point 164C., 36216-80-5

36216-80-5, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 36216-80-5

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 36216-80-5, name is Benzo[d]isoxazol-3-amine, introduce a new downstream synthesis route as follows.

EXAMPLE 12 3-[(4-pyridinyl)amino]-1,2-benzisoxazole A mixture of 3-amino-1,2-benzisoxazole (9.94 g, 74.18 mmole, prepared according to a method described in G. M. Shutske and K. J. Kapples, J. Heterocyclic Chem., 26, 1293 (1989)), 4-chloropyridine hydrochloride (22.27 g, 197 mmole) and 1-methyl-2-pyrolidinone was stirred vigorously at 130 C. for three hours. The reaction mixture was cooled, diluted with NaHCO3, and extracted with EtOAc, after which the organics were washed with water, dried (MgSO4), and concentrated. The residue was purified by flash chromatography (florisil, EtOAc), and then triturated with diethyl ether to yield 4.04 g (26%) of a fine brown solid. A 2.0 g portion was dissolved in boiling methanol and treated with charcoal (Darco) after which the product crystallized to yield 1.38 g of pale yellow crystals, mp 203 C. (dec.). ANALYSIS: Calculated for C12 H9 N3 O: 68.24% C; 4.29% H; 19.89% N; Found: 68.14% C; 4.12% H; 20.06% N.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Benzo[d]isoxazol-3-amine.

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Incorporated; US5328920; (1994); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 36216-80-5

To prepare a-5, a-4 (2.1 g, 0.015 mol) was added to chlorosulfonic acid (4.1 ml, 0.060 mol) at room temperature (RT). Said reaction mixture was stirred overnight under an inert atmosphere such as nitrogen at 60C. The mixture was then poured in ice/water. The precipitate was filtered and dried with toluene in a Buchi-apparatus (2.1 g, yield 60%)., 36216-80-5

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 36216-80-5, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; TIBOTEC PHARMACEUTICALS LTD; WO2003/97616; (2003); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.3,6-Dichlorobenzo[d]isoxazole, cas is 16263-54-0,the Benzisoxazole compound, below Introduce a new synthetic route., 16263-54-0

To a solution of l-Boc-5-trifluoromethoxybenzimidazole-2-one (5 g, 15.7 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (3.0 g, 15.7 mmol) and Cs2CO3 (11 g, 31.4 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and extracted with ethyl acetate (2×20 ml). The organic extracts were combined, dried over anhydrous Mg2SO4, and concentrated to dryness. The residue was purified by silica gel column chromatography using hexane/ethyl acetate (4:1) as solvent system. Fractions containing earlier eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-5- trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.54 (d, J=8.5, IH), 7.14 (d, J=8.5, IH), 7.13 (s, IH). Fractions containing later eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-6-trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.66 (brs, IH), 7.54 (d, J=8.5, IH), 7.13 (brs, IH).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 16263-54-0.

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound, introduce a new downstream synthesis route. 36216-80-5

To a solution of benzo[d]isoxazol-3-amine (1 eq.) and quinuclidin-3-one (1.1 eq.) in toluene (7 mL/mmol benzo[d]isoxazol-3-amine) at 25 C was added portion-wise titanium(IV) isopropoxide (9 eq.). The resulting solution was stirred at 100 C for 12 hours. On completion, the mixture was cooled to 0 C, and ethanol (1 mL/mmol benzo[d]isoxazol-3-amine) was added via syringe, followed by sodium borohydride (3.7 eq.) in portions. The reaction was stirred at 25 C for 3 hours, then quenched with saturated aqueous potassium carbonate solution, resulting in the formation of a solid. The mixture was filtered, and the filtrate was extracted with dichloromethane (5 chi 50 mL). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated in vacuo. The filter cake from the original filtration was slurried with methanol, and the mixture was filtered. The filtrate was directly evaporated to dryness. The combined residue from both batches was dissolved in 4N hydrochloric acid (20 mL) and stirred at room temperature for 4 hours. The mixture was made basic by addition of saturated potassium carbonate solution and extracted with dichloromethane (5 x 50 mL). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated in vacuo. The residue was purified by prep-HPLC to give the racemic aminobenzoisoxazole product. [00408] Chiral Separation: A solution of racemic aminobenzoisoxazole product in 3-5 mL of methanol was separated by cSFC (Waters SFC Prep 80, Column temperature: 25 C, back pressure: 100 bar, and wavelength: 220 nm). Each set of collected fractions was concentrated at room temperature. The residue was dissolved in 0.2 M hydrochloric acid and lyophilized to give each enantiomer of the aminobenzoisoxazole product; Following general procedure Bl, rac-1 was prepared from benzo[d]isoxazol-3 -amine (0.40 g, 3.0 mmol). The product was purified by prep-HPLC [Instrument: GX-A; Column: Phenomenex Gemini C18 150×25 mm, particle size: 10 mupiiota; Mobile phase: 44-74% acetonitrile in H20 (add 0.5% NH3 H20, v/v)] to give rac-1 (70 mg, 9% yield) as a yellow solid. LCMS (B): tPv=1.179 min., (ES+) m/z (M+H)+ = 244.2.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 36216-80-5, if you are interested., 36216-80-5

Reference£º
Patent; FORUM PHARMACEUTICALS, INC.; ACHARYA, Raksha; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; COOK, Andrew, Simon; HARRISON, Bryce, Alden; MCRINER, Andrew, J.; (127 pag.)WO2016/201096; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 36216-80-5, name is Benzo[d]isoxazol-3-amine, introduce a new downstream synthesis route as follows.

Example 4: (R)-l-(Benzo[rf]isoxazol-3-yIcarbamoylmethyl)-3-(l-phenyl- cycloheptanecarbonyloxy)-l-azonia-bicyclo[2.2.2]octane bromide To a mixture of benzo[Patent; ASTRAZENECA AB; ARGENTA DISCOVERY LIMITED; WO2009/138707; (2009); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Benzo[d]isoxazol-3-amine, cas is 36216-80-5,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 36216-80-5

Method BA A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration or DCM extraction (2×1 ml.) and purified using silica gel column chromatography (EtOAc/petroleum benzine 40-60 C gradient) or preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used as well as purification conditions.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Benzo[d]isoxazol-3-amine.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.Benzo[d]isoxazol-5-amine, cas is 239097-74-6,the Benzisoxazole compound. An updated downstream synthesis route of 239097-74-6 as follows. 239097-74-6

To a suspension of intermediate ester (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of 1,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated NaHCO3 to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous Na2SO4, filtered and concentrated. The residue was purified by trituration in DCM/Et2O, collected by filtration, and dried in vacuo to give the title compound (50 mg, 48%) as a yellow solid.1H NMR (400 MHz, CDCl3): delta 10.05 (s, 1H), 8.72 (s, 1H), 8.55 (s, 1H), 8.07 (s, 1H), 7.68 (dd, J = 6.8 Hz, 1.6 Hz, 1H), 7.59 (d, J = 6.8 Hz, 1H), 6.59 (s, 1H), 2.71 (s, 3H), 2.70 (s, 3H). LC-MS m/z: 308.1 [M+H+]. HPLC Purity (214 nm): 98%; tR = 8.38 min.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 239097-74-6, if you are interested., 239097-74-6

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse Marie, Josee; (134 pag.)WO2016/73889; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics