Tag: M.W:100-200

36216-80-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.36216-80-5,Benzo[d]isoxazol-3-amine, it is a common compound, a new synthetic route is introduced below.

To a solution of benzo[d]isoxazol-3-amine (1 eq.) and quinuclidin-3-one (1.1 eq.) in toluene (7 mL/mmol benzo[d]isoxazol-3-amine) at 25 C was added portion-wise titanium(IV) isopropoxide (9 eq.). The resulting solution was stirred at 100 C for 12 hours. On completion, the mixture was cooled to 0 C, and ethanol (1 mL/mmol benzo[d]isoxazol-3-amine) was added via syringe, followed by sodium borohydride (3.7 eq.) in portions. The reaction was stirred at 25 C for 3 hours, then quenched with saturated aqueous potassium carbonate solution, resulting in the formation of a solid. The mixture was filtered, and the filtrate was extracted with dichloromethane (5 chi 50 mL). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated in vacuo. The filter cake from the original filtration was slurried with methanol, and the mixture was filtered. The filtrate was directly evaporated to dryness. The combined residue from both batches was dissolved in 4N hydrochloric acid (20 mL) and stirred at room temperature for 4 hours. The mixture was made basic by addition of saturated potassium carbonate solution and extracted with dichloromethane (5 x 50 mL). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated in vacuo. The residue was purified by prep-HPLC to give the racemic aminobenzoisoxazole product. [00408] Chiral Separation: A solution of racemic aminobenzoisoxazole product in 3-5 mL of methanol was separated by cSFC (Waters SFC Prep 80, Column temperature: 25 C, back pressure: 100 bar, and wavelength: 220 nm). Each set of collected fractions was concentrated at room temperature. The residue was dissolved in 0.2 M hydrochloric acid and lyophilized to give each enantiomer of the aminobenzoisoxazole product; Following general procedure Bl, rac-1 was prepared from benzo[d]isoxazol-3 -amine (0.40 g, 3.0 mmol). The product was purified by prep-HPLC [Instrument: GX-A; Column: Phenomenex Gemini C18 150×25 mm, particle size: 10 mupiiota; Mobile phase: 44-74% acetonitrile in H20 (add 0.5% NH3 H20, v/v)] to give rac-1 (70 mg, 9% yield) as a yellow solid. LCMS (B): tPv=1.179 min., (ES+) m/z (M+H)+ = 244.2.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Benzo[d]isoxazol-3-amine reaction routes.

Reference£º
Patent; FORUM PHARMACEUTICALS, INC.; ACHARYA, Raksha; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; COOK, Andrew, Simon; HARRISON, Bryce, Alden; MCRINER, Andrew, J.; (127 pag.)WO2016/201096; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CH2C12 (10 ml) was stirred at RT. Phenylacetylchloride (0.0025 mol) was added drop wise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated. The residue was crystallized in isopropanol. Yielding 0.210 g compound 5 (yield of 84%), melting point 164C., 36216-80-5

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

851768-35-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.851768-35-9,5-Amino-3-methylbenzo[d]isoxazole, it is a common compound, a new synthetic route is introduced below.

Synthesis of 3-chloro-2-methyl-N-(3-methyl-benzo[d]isoxazol-5-yl)- benzenesulfonamide, STX 874 (KRB01027):; To a solution of 3-chloro-2-methylbenzenesulphonyl chloride (128 mg, 0.567 mmol) in dichloromethane (3 mL) was added pyridine (110 muL, 1.35 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-3-methyl-1, 2-benzisoxazole [26] (80 mg, 0.54 mmol) was added. The resulting mixture was stirred for 4 h at room temperature, then saturated NaHCO3 solution (8 mL) was added and the mixture was extracted into ethyl acetate (15 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (88 mg, 48%), single spot at Rf 0.58 (1: 1 hexane: ethyl acetate). mp 162.8-163. 2C, HPLC purity 99+% (tR 2.26 min in 10% water- acetonitrile).’H NMR (CDC13) : 6 7.80 (1H, dd, J=7.9, 1.3 Hz), 7.55 (1H, dd, J=8. 1, 1.1 Hz), 7.38 (2H, m), 7.17 (1 H, t, J=8.1 Hz), 7.10 (1H, dd, J=8.8, 2.2 Hz), 6.72 (1H, s, N-lez 2.72 (3H, s), 2.50 (3H, s). LCMS: 320.00 (M-CH3). FAB-MS (MH+, C15H13ClN2O3S) : calcd 337.0413, found 337.0422.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 851768-35-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

239097-74-6,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. Benzo[d]isoxazol-5-amine,239097-74-6, This compound has unique chemical properties. The synthetic route is as follows.

Synthesis of N-benzofdlisoxazol-5-yl-4-propyl-benzenesulfonamide, STX 919 (KRB01047) :; To a solution of 4n-propylbenzenesulphonyl chloride (171 mg, 0.783 mmol) in dichloromethane (4 mL) was added pyridine (150 uL, 1.86 mmol) and the mixture was stirred under N2 for 5 min, after which time 5-amino-1, 2-benzisoxazole (100 mg, 0.746 mmol) was added. The resulting mixture was stirred for 2 h at room temperature, then saturated NaHCO3 solution (10 mL) was added and the mixture was extracted into ethyl acetate (20 mL). The organic phase was washed with brine, dried (Na2SO4), filtered and evaporated to give a residue that was purified using flash chromatography to afford a white solid (170 mg, 72%), single spot at Rf 0.68 (1: 1 hexane: ethyl acetate). mp 130.0- 130. 6C, HPLC purity 99+% (tR 2.44 min in 10% water-acetonitrile).’H NMR (CDCI3) : No. 8.62 (1H, d, J=1.0 Hz), 7.60 (2H, d, J=8.4 Hz), 7.48 (2H, m), 7.19 (3H, m), 6.86 (1H, s, N-H), 2.58 (2H, t, J=7.5 Hz), 1.58 (2H, sextet, J=7.4 Hz), 0.88 (3H, t, J=7.4 Hz). LCMS: 315.14 (M-). FAB-MS (MH+, deHOsS) : calcd 317.0960, found 317.0962

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 239097-74-6.

Reference£º
Patent; STERIX LIMITED; WO2005/42513; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.36216-80-5,Benzo[d]isoxazol-3-amine, it is a common compound, a new synthetic route is introduced below.36216-80-5

Benzisoxazole-3-amine 2 (2.68 g, 20 mmol) was dissolved in water (25 ml) and concentrated HCl (12.5 ml) under vigorous stirring in an ice/water bath. A freshly prepared, ice-cold solution of NaNO2 (1.4 g, 20 mmol) in water (10 ml) was added drop wise to the reaction mixture by keeping the internal temperature between 0 to 5 C. After the completion of addition, the reaction mixture was stirred for an additional 10 min. A freshly prepared solution of sodium azide (1.3 g, 20 mmol) in water (10 ml) was added drop wise to the reaction mixture via an additional funnel while keeping the internal temperature of the reaction mixture below 5 C. Upon complete addition of the sodium azide solution, the reaction mixture was stirred for an additional 20-30 min at 0 C, followed by stirring at room temperature for another 3 h. The reaction mixture was extracted with ethyl acetate EtOAc (25 ml) three times. The combined organic layer was washed with water (25 ml) and brine (25 ml), dried over anhydrous sodium sulphate and concentrated under reduced pressure to get crude benzisoxazole-3-azide 3, which was purified by column chromatography over silica gel (60-120 mesh) using hexane/EtOAc (8:2) as eluent. The pure benzisoxazole-3-azide 3 was stored at 2-5 C in the refrigerator.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 36216-80-5, other downstream synthetic routes, hurry up and to see.

Reference£º
Article; Ashwini, Nanjundaswamy; Garg, Manoj; Mohan, Chakrabhavi Dhananjaya; Fuchs, Julian E.; Rangappa, Shobith; Anusha, Sebastian; Swaroop, Toreshettahally Ramesh; Rakesh, Kodagahalli S.; Kanojia, Deepika; Madan, Vikas; Bender, Andreas; Koeffler, H. Phillip; Basappa; Rangappa, Kanchugarakoppal S.; Bioorganic and Medicinal Chemistry; vol. 23; 18; (2015); p. 6157 – 6165;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5,A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To prepare a-5, a-4 (2.1 g, 0.015 mol) was added to chlorosulfonic acid (4.1 ml, 0.060 mol) at room temperature (RT). Said reaction mixture was stirred overnight under an inert atmosphere such as nitrogen at 60C. The mixture was then poured in ice/water. The precipitate was filtered and dried with toluene in a Buchi-apparatus (2.1 g, yield 60%).

The chemical industry reduces the impact on the environment during synthesis, 36216-80-5,Benzo[d]isoxazol-3-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; TIBOTEC PHARMACEUTICALS LTD; WO2003/97616; (2003); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

16263-54-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.16263-54-0,3,6-Dichlorobenzo[d]isoxazole, it is a common compound, a new synthetic route is introduced below.

(a) 3-(1-Piperazinyl)-6-chloro-1,2-benzisoxazole. A mixture of 3,6-dichloro-1,2-benzisoxazole and piperazine is reacted according to the procedure of Example 2. The 3-(1-piperazinyl)-6-chloro-1,2-benzisoxazole intermediate is isolated in 79% yield and used without further purification.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 16263-54-0, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Mead Johnson & Company; US4411901; (1983); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5-Methylbenzo[d]isoxazol-3-amine,89976-56-7, This compound has unique chemical properties. The synthetic route is as follows.,89976-56-7

The crude 5-methyl-benzo[d]isoxazol-3-ylamine was dissolved in 60 mL CH2Cl2. To this solution was added di-tert-butyl-dicarbonate (14.6 g, 66.8 mmol) and a catalytic amount of DMAP. The reaction mixture was stirred at RT overnight. The mixture was concentrated in vacuo to about 30 mL volume, treated with hexanes and filtered to yield 4.8 g of N,N-di-Boc-5-methyl-benzo[d]isoxazol-3-ylamine as a solid.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 89976-56-7.

Reference£º
Patent; Bolin, David Robert; Hamilton, Matthew Michael; McDermott, Lee Apostle; Qian, Yimin; US2011/112158; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 36216-80-5,Benzo[d]isoxazol-3-amine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.36216-80-5

Example 148: N-(benzo[d]isoxazol-3-yl)-2,4-dimethoxybenzenesulfonamide 148 A solution of 2,4-dimethoxybenzenesulfonyl chloride (0.18 g, 0.75 mmol) and benzo[d]isoxazol-3-amine (0.10 g, 0.75 mmol) in pyridine (1 ml.) was irradiated in the microwave at 1 10 C for 2 hours. The resultant mixture was loaded onto silica gel and the product purified twice by column chromatography (4 g Si02 cartridge, 0-45% EtOAc in petroleum benzine 40-60 C then 4g Si02 cartridge, 0-35% EtOAc in petroleum benzine 40-60 C) to yield two batches (78 mg and 5 mg) of [183] the title compound (total mass 83 mg, 33 % yield) as white solids. 1H NMR (400 MHz, CDCI3) d 8.1 1 (d, J = 8.05 Hz, 1H), 7.79 (s, 1H), 7.70 (d, J = 8.81Hz, 1H), 7.57 – 7.50 (m, 1H), 7.47 – 7.40 (m, 1H), 7.37 – 7.29 (m, 1H), 6.50 (d, J = 2.27 Hz, 1H), 6.42 (dd, J = 2.25, 8.81Hz, 1H), 3.98 (s, 3H), 3.81 (s, 3H). LCMS-B: rt 3.20 min, m/z = 356.8 [M+Na]+, 334.8 [M+H]+., 36216-80-5

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. Benzo[d]isoxazol-3-amine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 239097-74-6,Benzo[d]isoxazol-5-amine, as follows.239097-74-6

To a suspension of intermediate ester (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of 1,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated NaHCO3 to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous Na2SO4, filtered and concentrated. The residue was purified by trituration in DCM/Et2O, collected by filtration, and dried in vacuo to give the title compound (50 mg, 48%) as a yellow solid.1H NMR (400 MHz, CDCl3): delta 10.05 (s, 1H), 8.72 (s, 1H), 8.55 (s, 1H), 8.07 (s, 1H), 7.68 (dd, J = 6.8 Hz, 1.6 Hz, 1H), 7.59 (d, J = 6.8 Hz, 1H), 6.59 (s, 1H), 2.71 (s, 3H), 2.70 (s, 3H). LC-MS m/z: 308.1 [M+H+]. HPLC Purity (214 nm): 98%; tR = 8.38 min.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Benzo[d]isoxazol-5-amine, and friends who are interested can also refer to it.

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse Marie, Josee; (134 pag.)WO2016/73889; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics