M.W:100-200 | Page 373 of 377 | Heterocyclic Building Blocks-Benzisoxazole

A new synthetic route of 239097-74-6

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,239097-74-6,Benzo[d]isoxazol-5-amine,its application will become more common.

A common heterocyclic compound, 239097-74-6,Benzo[d]isoxazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 239097-74-6

To a suspension of intermediate ester (105 mg, 0.340 mmol) in DMF (0.5 mL) was added a solution of 1,2-benoxazol-5-amine (46 mg, 0.340 mmol) in DMF (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours until the reaction was complete, and quenched with the addition of TFA (5 drops). The precipitated solid was collected by filtration, suspended in DCM, basified with saturated NaHCO3 to pH ~8. The aqueous layer was extracted with DCM, dried over anhydrous Na2SO4, filtered and concentrated. The residue was purified by trituration in DCM/Et2O, collected by filtration, and dried in vacuo to give the title compound (50 mg, 48%) as a yellow solid.1H NMR (400 MHz, CDCl3): delta 10.05 (s, 1H), 8.72 (s, 1H), 8.55 (s, 1H), 8.07 (s, 1H), 7.68 (dd, J = 6.8 Hz, 1.6 Hz, 1H), 7.59 (d, J = 6.8 Hz, 1H), 6.59 (s, 1H), 2.71 (s, 3H), 2.70 (s, 3H). LC-MS m/z: 308.1 [M+H+]. HPLC Purity (214 nm): 98%; tR = 8.38 min.

Reference£º
Patent; LYSOSOMAL THERAPEUTICS INC.; SKERLJ, Renato, T.; LANSBURY, Peter, T.; GOOD, Andrew, C.; BOURQUE, Elyse Marie, Josee; (134 pag.)WO2016/73889; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about Benzo[d]isoxazol-3-amine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

36216-80-5 A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

EXAMPLE 12 3-[(4-pyridinyl)amino]-1,2-benzisoxazole A mixture of 3-amino-1,2-benzisoxazole (9.94 g, 74.18 mmole, prepared according to a method described in G. M. Shutske and K. J. Kapples, J. Heterocyclic Chem., 26, 1293 (1989)), 4-chloropyridine hydrochloride (22.27 g, 197 mmole) and 1-methyl-2-pyrolidinone was stirred vigorously at 130 C. for three hours. The reaction mixture was cooled, diluted with NaHCO3, and extracted with EtOAc, after which the organics were washed with water, dried (MgSO4), and concentrated. The residue was purified by flash chromatography (florisil, EtOAc), and then triturated with diethyl ether to yield 4.04 g (26%) of a fine brown solid. A 2.0 g portion was dissolved in boiling methanol and treated with charcoal (Darco) after which the product crystallized to yield 1.38 g of pale yellow crystals, mp 203 C. (dec.). ANALYSIS: Calculated for C12 H9 N3 O: 68.24% C; 4.29% H; 19.89% N; Found: 68.14% C; 4.12% H; 20.06% N.

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Incorporated; US5328920; (1994); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about Benzo[d]isoxazol-3-amine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by mass directed preparative HPLC to give the desired product. See Table B for reaction components and amounts used.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about Benzo[d]isoxazol-3-amine

a) N-Benzo[d]isoxazol-3-yl-2-chloro-acetamide To a mixture of benzo[d]isoxazol-3-ylamine (1 g) and cesium carbonate (2.42 g) in dry DMF (20 mL), stirred at rt, was added bromoacetyl chloride (0.62 mL) by dropwise addition. After stirring the mixture for 8 hours, the reaction was poured into water (100 mL) and the products extracted into ether (2*200 mL). The combined extracts were dried over magnesium sulfate and concentrated to dryness. The crude product was purified on silica gel using ether/isohexane (4/6) to afford the sub-titled compound as a colourless solid (0.5 g). m/e 210 [M+H]+

Reference£º
Patent; Bull, Richard James; Skidmore, Elizabeth Anne; Ford, Rhonan Lee; Mather, Andrew Nigel; Mete, Antonio; US2011/172237; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 36216-80-5

To a solution of intermediate 3 (0.0025 mol) in isopropylether (5 ml) THF (1 ml) was added and the reaction mixture stirred at RT. Phenylisocyanaat (0.0050 mol) was added and the reaction mixture stirred overnight at RT. The precipitate was filtered off, washed with isopropylether and evaporated dried. The residue was further purified over reversed phase HPLC on a Xterra MS C18 column (3′. 5 Rm, 4.6 x 100 mm) with a flow rate of 1.6 ml/min (Elution conditions: three mobile phases (mobile phase A 95% e t..

25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min., to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 4 (yield of 5%, Melting Point 246C).

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of 3,6-Dichlorobenzo[d]isoxazole

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,16263-54-0,3,6-Dichlorobenzo[d]isoxazole,its application will become more common.

A common heterocyclic compound, 16263-54-0,3,6-Dichlorobenzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 16263-54-0

(a) 3-(1-Piperazinyl)-6-chloro-1,2-benzisoxazole. A mixture of 3,6-dichloro-1,2-benzisoxazole and piperazine is reacted according to the procedure of Example 2. The 3-(1-piperazinyl)-6-chloro-1,2-benzisoxazole intermediate is isolated in 79% yield and used without further purification.

Reference£º
Patent; Mead Johnson & Company; US4411901; (1983); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The origin of a common compound about 36216-80-5

EXAMPLE 34 2,6-DICHLORO-N-(3-BENZISOXAZOLYL)BENZAMIDE 3-Aminobenzisoxazole (2 gram), 2,6-dichlorobenzoylchloride (2 gram), and 50 ml. of toluene are heated at reflux for 16 hours. After evaporation of the solvent at reduced pressure, the resultant oily semi-solid is triturated with ether. The solid so formed is then washed with ether and water and constitutes the desired product.

Reference£º
Patent; Eli Lilly and Company; US4322429; (1982); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about 5-Methylbenzo[d]isoxazol-3-amine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,89976-56-7,5-Methylbenzo[d]isoxazol-3-amine,its application will become more common.

89976-56-7 A common heterocyclic compound, 89976-56-7,5-Methylbenzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The crude 5-methyl-benzo[d]isoxazol-3-ylamine was dissolved in 60 mL CH2Cl2. To this solution was added di-tert-butyl-dicarbonate (14.6 g, 66.8 mmol) and a catalytic amount of DMAP. The reaction mixture was stirred at RT overnight. The mixture was concentrated in vacuo to about 30 mL volume, treated with hexanes and filtered to yield 4.8 g of N,N-di-Boc-5-methyl-benzo[d]isoxazol-3-ylamine as a solid., 89976-56-7

Reference£º
Patent; Bolin, David Robert; Hamilton, Matthew Michael; McDermott, Lee Apostle; Qian, Yimin; US2011/112158; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Some scientific research about 3,6-Dichlorobenzo[d]isoxazole

16263-54-0 A common heterocyclic compound, 16263-54-0,3,6-Dichlorobenzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of l-Boc-5-trifluoromethoxybenzimidazole-2-one (5 g, 15.7 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (3.0 g, 15.7 mmol) and Cs2CO3 (11 g, 31.4 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and extracted with ethyl acetate (2×20 ml). The organic extracts were combined, dried over anhydrous Mg2SO4, and concentrated to dryness. The residue was purified by silica gel column chromatography using hexane/ethyl acetate (4:1) as solvent system. Fractions containing earlier eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-5- trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.54 (d, J=8.5, IH), 7.14 (d, J=8.5, IH), 7.13 (s, IH). Fractions containing later eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-6-trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.66 (brs, IH), 7.54 (d, J=8.5, IH), 7.13 (brs, IH).

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A new synthetic route of Benzo[d]isoxazol-3-amine

Method BA A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (1 ml.) was stirred at room temperature for 16 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration or DCM extraction (2×1 ml.) and purified using silica gel column chromatography (EtOAc/petroleum benzine 40-60 C gradient) or preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used as well as purification conditions.