Tag: M.W:100-200

A common heterocyclic compound, 16263-54-0,3,6-Dichlorobenzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 16263-54-0

To a solution of benzimidazole-2-one (Aldrich, 1.1 g, 7.5 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (1.5 g, 7.5 mmol) and Cs2CO3 (4.8 g, 15 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and stirred in a ice bath for 2 hours. The mixture was then filtered. The solid was washed with water and dried under high vacuum to obtain 2.0 g (93%) of a yellow solid as l-(6-chlorobenzisoxazol-3-yl)benzimidazole-2-one. To a solution of the above product (1.0 g, 3.5 mmol) in DMF (15 ml) was added NaOMe solution in methanol (30% wt/wt, 10 ml). The mixture was heated to 8O0C under vacuum to remove residual methanol and then stirred at 11O0C under nitrogen overnight. The mixture was then cooled to room temperature, diluted with water (50 ml), adjusted to pH 6 with 10% aqueous HCl. The resulting suspension was stirred in an ice bath for 2 hours and filtered. The solid was washed with water and dried in an oven (900C) for 2 hours and then under high vacuum at room temperature for 3 hours to obtain a slightly yellow solid. LC-MS m/e: (M+ 1) = 282

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,16263-54-0,3,6-Dichlorobenzo[d]isoxazole,its application will become more common.

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

(Synthesis of X-4) In a three-neck flask, after filling the inside of flask with nitrogen gas, 6.5 g of 10% Pd-C (produced by Wako Pure Chemical Industries, Ltd.) was added, and 2,000 mL of ethanol and the entire amount of the crude product of Compound (X-3) obtained above were further added. The resulting mixture was heated/refluxed, and 55 mL (3 molar equivalents) of formic acid was slowly added dropwise thereto, followed by stirring at this temperature for 5 hours. The resulting reaction mixture was cooled to an inner temperature of 25C and then subjected to Celite filtration and to the mother solution separated by filtration, 105 g of 1,5-naphthalenedisulfonic acid was added. After raising the inner temperature to 70C, the mixture was stirred for 30 minutes and then gradually cooled to room temperature, and the crystal was separated by filtration to obtain 100 g of Compound (X-4). The yield was 72% based on Compound (X-1) as the starting material. The obtained crystal was pale brown. 1H NMR (deuterated DMSO): delta6.95-6.98 (1H), delta7.02-7.04 (1H), delta7.40-7.51 (3H), delta7.90-7.95 (1H), delta8.75 (1H), delta8.85-8.88 (2H), delta9.03 (2H), delta10.89 (1H).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; FUJIFILM Corporation; EP2460799; (2012); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

(Synthesis of X-4) In a three-neck flask, after filling the inside of flask with nitrogen gas, 6.5 g of 10% Pd-C (produced by Wako Pure Chemical Industries, Ltd.) was added, and 2,000 mL of ethanol and the entire amount of the crude product of Compound (X-3) obtained above were further added. The resulting mixture was heated/refluxed, and 55 mL (3 molar equivalents) of formic acid was slowly added dropwise thereto, followed by stirring at this temperature for 5 hours. The resulting reaction mixture was cooled to an inner temperature of 25C and then subjected to Celite filtration and to the mother solution separated by filtration, 105 g of 1,5-naphthalenedisulfonic acid was added. After raising the inner temperature to 70C, the mixture was stirred for 30 minutes and then gradually cooled to room temperature, and the crystal was separated by filtration to obtain 100 g of Compound (X-4). The yield was 72% based on Compound (X-1) as the starting material. The obtained crystal was pale brown. 1H NMR (deuterated DMSO): delta6.95-6.98 (1H), delta7.02-7.04 (1H), delta7.40-7.51 (3H), delta7.90-7.95 (1H), delta8.75 (1H), delta8.85-8.88 (2H), delta9.03 (2H), delta10.89 (1H).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

Reference£º
Patent; FUJIFILM Corporation; EP2460799; (2012); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

EXAMPLE 7 N-[2-(4-Morpholinyl)ethyl]-1,2-benzisoxazol-3-amine To a solution of 3-amino-1,2-benzisoxazole (3.5 g) in N,N-dimethylformamide (DMF) (100 ml) was added sodium hydride (0.8 g) under nitrogen. The reaction was stirred one hour at ambient temperature. A solution of 4-(2-chloroethyl)morpholine (4.0 g) in DMF (50 ml) was added followed by heating to 120 C. for one hour. TLC (5% MeOH/DCM) analysis revealed the absence of starting material. The reaction was quenched with water and extracted with EtOAc. The organic layer was washed with water, dried (MgSO4), and concentrated in vacuo. Flash column chromatography (silica gel) eluding with 1.5-2.5% MeOH/DCM afforded the product (2.5 g), m.p. 79-80 C. ANALYSIS: Calculated for C13 H17 N3 O2: 63.14%C 6.93%H 16.99%N Found: 63.47%C 6.87%H 16.95%N

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; Hoechst-Roussel Pharmaceutical Incorporated; US5494908; (1996); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5 A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: To a stirred solution of pyridin-2-amine (1.0 g, 10.6 mmol) and pyridine (1.01 mL, 12.7 mmol) in THF (35 mL) was added 2,2,2- trichloroethyl chloroformate (1.76 mL, 12.7 mmol) dropwise at 0 C. The mixture was stirred at 0 C for 1.5 h, poured into water, and extracted with EtOAc. The organic layer was washed with water, dried over anhydrous MgSO4, and concentrated in vacuo. The residue was triturated with Et2O-hexane to give 36 (1.76 g, 62%) as a colorless powder.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Article; Kono, Mitsunori; Matsumoto, Takahiro; Kawamura, Toru; Nishimura, Atsushi; Kiyota, Yoshihiro; Oki, Hideyuki; Miyazaki, Junichi; Igaki, Shigeru; Behnke, Craig A.; Shimojo, Masato; Kori, Masakuni; Bioorganic and Medicinal Chemistry; vol. 21; 1; (2013); p. 28 – 41;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

Phenyl 1 ,2-benzisoxazol-3-ylcarbamateA solution of 1 ,2-benzisoxazol-3-amine (1.00 g; CASNo. 36216-80-5) and triethylamine (1.09 ml_) in acetonitrile (5 ml_) was added dropwise to at 0 0C solution of phenyl chloroformate (0.989 ml_) in THF (20 ml_). The reaction was stirred at 0 0C for 1 h and then allowed to warm to RT overnight. The reaction was diluted with ethyl acetate and washed with 1 N HCI and brine. The organic layer was dried over sodium sulfate, filtered, and concentrated to give the crude product as a reddish brown solid. The solid was triturated with refluxing diisopropyl ether, cooled to RT, and filtered to give final product as a tan solid (1.22 g, 64%). m/z 255 (MH+).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; PFIZER INC.; LONG, Scott Allen; MEYERS, Marvin Jay; PELC, Matthew James; SCHWEITZER, Barbara Ann; THORARENSEN, Atli; WANG, Lijuan Jane; WO2010/58318; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

EXAMPLE 34 2,6-DICHLORO-N-(3-BENZISOXAZOLYL)BENZAMIDE 3-Aminobenzisoxazole (2 gram), 2,6-dichlorobenzoylchloride (2 gram), and 50 ml. of toluene are heated at reflux for 16 hours. After evaporation of the solvent at reduced pressure, the resultant oily semi-solid is triturated with ether. The solid so formed is then washed with ether and water and constitutes the desired product.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; Eli Lilly and Company; US4322429; (1982); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 16263-54-0,3,6-Dichlorobenzo[d]isoxazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 16263-54-0

To a solution of l-Boc-5-trifluoromethoxybenzimidazole-2-one (5 g, 15.7 mmol) in DMF (20 ml) was added 3,6-dichlorobenzoisoxazole (3.0 g, 15.7 mmol) and Cs2CO3 (11 g, 31.4 mmol). The suspension was heated to 15O0C in an oil bath and stirred overnight. The mixture was then cooled to room temperature, diluted with water (30 ml) and extracted with ethyl acetate (2×20 ml). The organic extracts were combined, dried over anhydrous Mg2SO4, and concentrated to dryness. The residue was purified by silica gel column chromatography using hexane/ethyl acetate (4:1) as solvent system. Fractions containing earlier eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-5- trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.54 (d, J=8.5, IH), 7.14 (d, J=8.5, IH), 7.13 (s, IH). Fractions containing later eluted product were combined and concentrated to obtain l-[3-(6-chloro)-benzisoxazoyl]-6-trifluoromethoxylbenzimidazole-2-one as a white solid. 1H NMR (DMSO, 500 MHz) delta 8.28 (d, J=9.0Hz, IH), 8.12 (s, IH), 7.74 (d, J=9.0Hz, IH), 7.66 (brs, IH), 7.54 (d, J=8.5, IH), 7.13 (brs, IH).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,16263-54-0,3,6-Dichlorobenzo[d]isoxazole,its application will become more common.

Reference£º
Patent; MERCK & CO., INC.; WO2006/22954; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

1 ,2-Benzoxazol-3-amine (802 mg, 5.98 mmol) was dissolved in a mixture of anhydrous dichloromethane (4 ml_) and anhydrous pyridine (1 .5 ml_, 19 mmol). To this mixture was added, drop-wise, a solution of ethyl malonyl chloride (1.00 g, 6.64 mmol) in anhydrous dichloromethane (4 ml_). The resulting warm mixture (from slight exotherm) was stirred at ambient temperature for 30 min and quenched with the addition of cold water (20 ml_). Solid sodium carbonate was added until a pH of 10 was reached, and the mixture was stirred at ambient temperature for 1 hour. The organic layer was separated and the aqueous layer back-extracted withdichloromethane (4 x 30 ml_). The combined organic layers were passed through a phase separator column and concentrated under reduced pressured to yield crude ethyl 3-(1 ,2-benzoxazol-3-ylamino)-3- oxopropanoate.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Benzo[d]isoxazol-3-amine,36216-80-5,its application will become more common.

Reference£º
Patent; TARGACEPT, INC.; MAZUROV, Anatoly A.; MIAO, Lan; SHOWALTER, Todd; WO2013/28587; (2013); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A common heterocyclic compound, 36216-80-5,Benzo[d]isoxazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 36216-80-5

Example 77; (3R)-1-[2-(1,2-Benzisoxazol-3-ylamino)-2-oxoethyl]-3-{[2-piperidin-1-yl-2-(2-thienyl)propanoyl]oxy}-1-azoniabicyclo[2.2.2]octane chloride (Isomer 1); a) N-1,2-Benzisoxazol-3-yl-2-chloroacetamide; Benzo[d]isoxazol-3-amine (1 g) and cesium carbonate (2.429 g) in dry DMF (20 mL) was stirred at 23 C. whilst bromoacetyl chloride (0.624 mL) was added dropwise to the mixture. After stirring for 8 h, the reaction was poured into water (100 mL) and the mixture extracted with diethyl ether (2¡Á200 mL). The combined extracts were dried over magnesium sulfate and concentrated to dryness. The crude product was purified on silica gel using 40% ether isohexane. The subtitled compound was isolated as a colourless solid (0.5 g).m/e 210 [M+H]+ 1H NMR (400 MHz, DMSO) delta 11.45 (1H, s), 8.02 (1H, d), 7.72-7.63 (2H, m), 7.39 (1H, ddd), 4.47 (2H, s).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,36216-80-5,Benzo[d]isoxazol-3-amine,its application will become more common.

Reference£º
Patent; Ford, Rhonan; Mete, Antonio; Millichip, Ian; Teobald, Barry; US2010/113510; (2010); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics