Tag: M.W:200-300

719-64-2, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 719-64-2, name is 5-Chloro-3-phenylbenzo[c]isoxazole, introduce a new downstream synthesis route as follows.

(3) Mix tetrahydrofuran and triethylamine,Then add 5-chloro-3-phenyl-2,1 benzisoxazole,Palladium carbon catalyst mixing,Passing nitrogen,Replace the air 8 times,Then pass hydrogen to a pressure of 0.1 MPa.Magnetic stirring for 1h,Then filter,The obtained filter residue was vacuum dried at 50 C for 4 h.among them,Tetrahydrofuran,Triethylamine,5-chloro-3-phenyl-2,1 benzisoxazole,The mass ratio of the palladium carbon catalyst is 30:5:2:0.08,That is, 2-amino-5-chlorobenzophenone is obtained.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-3-phenylbenzo[c]isoxazole, and friends who are interested can also refer to it.

Reference£º
Patent; SHAANXI JUJIEHAN CHEMICAL CO LTD; Shanxi Jujiehan Chemical Co., Ltd.; LI CHANGYING; Li Changying; (4 pag.)CN107827763; (2018); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 37924-85-9, name is 3-(Bromomethyl)benzo[d]isoxazole, introduce a new downstream synthesis route as follows.

General procedure: To NaOMe (25% soln, 0.5 mL, 2.2 mmol) in MeOH (5 mL) was added thiosemicarbazide 9 (200 mg, 2.2 mmol). Diethyloxalate (0.3 mL, 2.2 mmol) was then added dropwise. The mixture was heated at 65 C for 2 h and then cooled to rt. 1-(Bromomethyl)-4-chlorobenzene (500 mg, 2.4 mmol) was added in one portion; stirring was continued at rt for 3 h and then heated overnight at 50 C. The reaction mixture was concentrated. The residue was dissolved in EtOAc (40 mL), washed with water (20 mL), and brine (20 mL). The organic phase was dried over Na2SO4, concentrated and purified by silica gel column chromatography (EtOAc w/ 0.2% HOAc). The product was triturated in Et2O to afford 59 mg of 6g as a light yellow solid (10% yield)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 37924-85-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Hin, Niyada; Duvall, Bridget; Berry, James F.; Ferraris, Dana V.; Rais, Rana; Alt, Jesse; Rojas, Camilo; Slusher, Barbara S.; Tsukamoto, Takashi; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2088 – 2091;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 651780-27-7, name is Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, introduce a new downstream synthesis route as follows.

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A., 651780-27-7

According to the analysis of related databases, 651780-27-7, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

According to the analysis of related databases, 37924-85-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.5-Chloro-3-phenylbenzo[c]isoxazole, cas is 719-64-2,the Benzisoxazole compound. A new synthetic method of this compound is introduced below. 719-64-2

That is, using the above conditions, Aldimine 1a (54.7mg, 0.2mmol, 100mol%),[RhCp * Cl2] 2 (3.1mg, 0.005mmol, 2.5mol%), AgSbF6 (6.9mg, 0.02mmol, 10mol%),Then in an oven dried and sealed tube filled with PivOH (10.2mg, 0.1mmol, 50mol%),Under room temperature and air, anthranyl 2a (68.9 mg, 0.3 mmol, 200 mol%) and DMF (1 mL) were added.The reaction mixture was stirred at 120 C. for 6 hours and cooled to room temperature.The reaction mixture was diluted with EtOAc (3 mL) and concentrated in vacuo.The residue was purified by flash column chromatography (n-hexane / EtOAc = 7: 1) to give 3a (48.2 mg) in 73% yield.

719-64-2, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 719-64-2

Reference£º
Patent; SUNGKYUNKWAN University Research & Business Foundation; Kim In-su; Kim Hyeong-sik; (41 pag.)KR2020/25255; (2020); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 651780-27-7

651780-27-7, 10% Palladium on carbon (1.5g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20g, 0. 081mol) in ethanol (300ml) at 0 C under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3 x 50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4 x 50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A. Literature reference: Angell, R. M.; Baldwin, I. R.; Bamborough, P.; Deboeck, N. M.; Longstaff, T.; Swanson, S. W004010995A1 The following acid was prepared using this method: 1,2-Benzisoxazole-3-carboxylic acid.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2005/63767; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 37924-85-9, name is 3-(Bromomethyl)benzo[d]isoxazole, introduce a new downstream synthesis route as follows. 37924-85-9

Step 1 : A mixture of tert-butyl methyl((25′)-l-oxo-l-(4-oxo-2′,3′,4,5,5′,6′-hexahydro-3H- spiro[benzo[][l,4]oxazepine-2,4′-pyran]-3-ylamino)propan-2-yl)carbamate (156 mg, 360 muetaiotaomicron), 3-(bromomethyl)benzo[d]isoxazole (83.9 mg, 396 muetaiotaomicron), Cs2C03 (141 mg, 432 muetaiotaomicron) and Nal (64.7 mg, 432 muiotaetaomicron) in DMF (900 mu) was stirred at RT for 18 h, diluted with EtOAc, washed with H20, brine, dried over Na2S04, filtered, and the filtrate concentrated to give a residue that was purified by silica gel chromatography. The resulting material was purified by supercritical fluid chromatography (SFC) to provide tert-butyl (5)-l-((5)-5-(benzo[ ]isoxazol-3-ylmethyl)-4- oxo-2′,3^4,5,5^6′-hexahydro-3H-spiro|enzo[][l,4]oxazepine-2,4′-pyran]-3-ylamino)-l- oxopropan-2-yl(methyl)carbamate (54.5 mg, 27 %) as a white foam.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-(Bromomethyl)benzo[d]isoxazole.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DONNELL, Andrew F.; HAN, Xiaochun; KESTER, Robert Francis; KONG, Norman; LE, Kang; LOU, Yan; MICHOUD, Christophe; MOLITERNI, John Anthony; REMISZEWSKI, Stacy; RUPERT, Kenneth Carey; YUN, Weiya; WO2014/23708; (2014); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.3-(Bromomethyl)benzo[d]isoxazole, cas is 37924-85-9,the Benzisoxazole compound. Here is a downstream synthesis route of the compound 37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 37924-85-9 reaction routes.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7,the Benzisoxazole compound, below Introduce a new synthetic route.

Toluene (40 mL) was added to a flask containing ethyl [6-BROM-1,] 2-benzisoxazole-3-carboxylate (3.15 g, 11.7 mmol), tetrakis (triphenylphosphine) palladium [(0)] (835 mg, 0.723 mmol, Strem), cesium carbonate (4.12 g, 12.6 mmol, Aldrich), and 2- (trifluoromethyl) phenylboronic acid (2. [38] g, 12.5 mmol, Aldrich) under argon. This mixture was heated in a 100 C oil bath for 35 hours. The mixture was diluted with EtOAc (250 mL) and washed with 4: 1 water: brine (250 [ML)] followed by brine (250 mL). The organics were filtered through a [1″PLUG] of silica gel and evaporated. Product was split in two, adsorbed onto silica gel, and purified on Biotage Flash 40 M+ silica cartridges using 20% EtOAc in heptane. Yield was 2.08 g of orange solid. [‘H] NMR (400 MHz, DMSO-d6) [5] ppm 1.42 (t, [J=7.] 15 Hz, 3 H) 4.51 (q, [J=7.] 05 Hz, 2 H) 7.52 (d, J=7. 46 Hz, [1] H) 7.51 (d, [J=8.] 09 Hz, 1 H) 7.71 (t, J=7. 57 Hz, [1] H) 7.79 (t, [J=7.] 36 Hz, 1 H) 7.91 (d, [J=7.] 67 Hz, [1] [H)] 7.93 (s, 1 H) 8.14 (d, J=8. 09 Hz, 1 H).

According to the analysis of related databases, 651780-27-7, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; PHARMACIA & UPJOHN COMPANY; WO2004/18428; (2004); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, cas is 651780-27-7,the Benzisoxazole compound. A new synthetic method of this compound is introduced below. 651780-27-7

(21). Iris{dibenzylideneacetoae)dipailadiuffi (123.6 mg, 0.14 mmol, 9.0 MO1%), XantPhos ( 104 mg, 0. 8 mmo’l. 12 moi%), ethyl 6-bromobenzo|d]isoxazole-3-carboxylate (608 mg, 2.25 mmol, 1.5 eq.),l- jX4 raemoxypheny1)me&yI}pyjrazofo^^(381 mg, 1.5 mmol, 1.0 eq.) and cesium carbonate (731 rag, 2.25 mmol. 1 ,5 eq.) were charged in a microwave vial. The vial was evacuated and purged with nitrogen (3X) and 1,4-dioxane (7.5 mL) was added. The reaction mixture was subjected to a microwave reactor tor 140 “C. After 2 h, the reaction mixture was cooled and filtered through a pad of Celite which was washed with EtOAc. Solvents were removed. Purification using reverse phase (Giison HPLC, acidic method (ACN water/0.1% TFA), gradient; 61-91%). Giison fractions were neutralized with sat solo. NaHC:::1.8, 8.8 H IH), 7.48 (dd, ./ – 4.3, 8.6 Hz, l H), 730 (d, J:::8.7 Hz, 2H), 6.88 (ddd, J – 2.9, 4.9, 8.7 Hz, 2H), 5.56 (s, 2H), 4.87 (q, 7.0 Hz, 2H), 3.70 (s, 3H), 1.41 (t, J = 3.2 Hz, 3H). ES-MS GammaMu+l f : 443.3.

651780-27-7, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 651780-27-7

Reference£º
Patent; VANDERBILT UNIVERSITY; CONN, P. Jeffrey; HOPKINS, Corey R.; LINDSLEY, Craig W.; NISWENDER, Colleen M.; ENGERS, Darren W.; PANARESE, Joe; BOLLINGER, Sean; ENGERS, Julie; (157 pag.)WO2016/115282; (2016); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics