Tag: M.W:200-300

651780-27-7 A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

20a) Ethyl 6-(4-hydroxyphenyl)-l,2-benzisoxazole-3-carboxylateEthyl 6-bromo-l,2-benzisoxazole-3-carboxylate (0.34 g, 1.26 mmol), (4- hydroxyphenyl)boronic acid (0.21, 1.51 mmol), tetrakis(triphenylphosphine)palladium (0) (0.06 g, 0.05 mmol) and 2 M sodium carbonate (5 mL) in 1 ,2-dimethoxyethane (6 mL) were stirred at 80 0C for 1 hour. The reaction mixture was diluted with water, followed by ethyl acetate. The layers were separated and the ethyl acetate layer was washed with brine, dried over magnesium sulfate, filtered, and concentrated to afford the crude material. The crude material was purified using hexanes: ethyl acetate (0 to 40% ethyl acetate) to afford a mixture of desired product, plus the free acid of the desired product, 6-(4-hydroxyphenyl)-l,2- benzisoxazole-3-carboxylic acid. All the fractions were combined and concentrated.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 651780-27-7 reaction routes.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157270; (2008); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5-Chloro-3-phenylbenzo[c]isoxazole,719-64-2, This compound has unique chemical properties. The synthetic route is as follows.

A, in a reaction vessel equipped with a stirrer, a reflux condenser, 5-chloro-3-phenyl-benzisoxazole 0.26 mol, the mass fraction of 30% 2-bromo-5-fluoronitrobenzene solution 390ml, nickel chloride powder 0.46 mol, control the stirring speed at 190 rpm, raise the solution temperature to 78 C, reflux reaction 120 min; B, adding 90% of 4-chlorophenethylamine solution with a mass fraction of 21% slowly add the ethylene glycol dimethyl ether solution with a mass fraction of 37% adding time to control at 110min, continue to reflux reaction 5h. C, add the mass fraction of 27% sodium bicarbonate solution 200ml, reduce the solution temperature to 16 C, molecular sieve bleaching, filtration, the filtrate was concentrated, again lowering the solution temperature to 5 C, the mass fraction of 70% triethylamine solution washing, calcium oxide dehydrating agent dehydration, to give crystals of 2-amino-5-chlorobenzophenone 55.59 g, yield 92%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 719-64-2.

Reference£º
Patent; Chengdu Qiesite Technology Co., Ltd.; Peng Fei; (9 pag.)CN106083621; (2016); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, as follows.651780-27-7

20a) Ethyl 6-(4-hydroxyphenyl)-l,2-benzisoxazole-3-carboxylateEthyl 6-bromo-l,2-benzisoxazole-3-carboxylate (0.34 g, 1.26 mmol), (4- hydroxyphenyl)boronic acid (0.21, 1.51 mmol), tetrakis(triphenylphosphine)palladium (0) (0.06 g, 0.05 mmol) and 2 M sodium carbonate (5 mL) in 1 ,2-dimethoxyethane (6 mL) were stirred at 80 0C for 1 hour. The reaction mixture was diluted with water, followed by ethyl acetate. The layers were separated and the ethyl acetate layer was washed with brine, dried over magnesium sulfate, filtered, and concentrated to afford the crude material. The crude material was purified using hexanes: ethyl acetate (0 to 40% ethyl acetate) to afford a mixture of desired product, plus the free acid of the desired product, 6-(4-hydroxyphenyl)-l,2- benzisoxazole-3-carboxylic acid. All the fractions were combined and concentrated. The mixture was then dissolved in ethanol. Thionyl chloride was added, and the reaction mixture was reflux for 8 days. The reaction mixture was cooled to room temperature and concentrated. The concentrated material was diluted with 5% sodium bicarbonate, and extracted with ethyl acetate. The ethyl acetate layer was washed with water followed by brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified using hexanes: ethyl acetate (0 to 100% ethyl acetate) to afford 0.044 g (13%) of ethyl 6-(4-hydroxyphenyl)- 1 ,2-benzisoxazole-3- carboxylate. 1H NMR (400 MHz, d6-DMSO): delta 9.76 (s, IH), 8.05 (m, 2H), 7.79 (dd, J = 8, 1 Hz, IH), 7.65 (d, J = 9 Hz, 2H), 6.88 (d, J = 9 Hz, 2H), 4.47 (q, J = 7 Hz, 2H), 1.39 (t, J = 7 Hz, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 651780-27-7, and friends who are interested can also refer to it.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/157270; (2008); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

651780-27-7,A common heterocyclic compound, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

10% Palladium on carbon (1.5 g) and triethylamine (7.5 g, 82.4 mmol) were added to a solution of ethyl 6-bromobenzisoxazole-3-carboxylate (20 g, 0.081 mol) in ethanol (300ml) at 0 C. under an atmosphere of nitrogen. The nitrogen atmosphere was removed by evacuation and replaced with hydrogen gas, and the reaction mixture was maintained for 1 hour. The hydrogen atmosphere was removed by evacuation and replaced with nitrogen gas, and the palladium removed by filtration through Celite. The filter cake was washed with ethanol (3¡Á50 mL) and the filtrates were concentrated. The residue was dissolved in dichloromethane (200 mL) and the solution was washed with water (4¡Á50 mL), dried (sodium sulfate) and evaporated to provide 13.0 g of the product as a yellow solid (96%). The ester was saponified using sodium hydroxide to provide the acid. The acid was coupled with the bicyclobase according to procedure A.

The chemical industry reduces the impact on the environment during synthesis, 651780-27-7,Ethyl 6-bromobenzo[d]isoxazole-3-carboxylate,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Xie, Wenge; Herbert, Brian; Ma, Jianguo; Nguyen, Truc Minh; Schumacher, Richard; Gauss, Carla Maria; Tehim, Ashok; US2005/250808; (2005); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

37924-85-9,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3-(Bromomethyl)benzo[d]isoxazole,37924-85-9, This compound has unique chemical properties. The synthetic route is as follows.

BIOS-Na (Compound III) was prepared in accordance with the method described in Example 1 of U.S. Pat. No. 4,172,896. A solution of sodium sulfite (24.3 grams) in water (390 ml) was added to a solution of 3-bromomethyl-1,2-benzisoxazole (24 grams, Compound II) in methanol (390 ml), stirred with heating to 50 C. for 4 hours. After completion of the reaction, the solution was concentrated under reduced pressure. The resulting crystalline residue was heated to about 50-60 C. in methanol (750 ml) and the solution filtered. The clear filtrate was concentrated under reduced pressure and the resulting crystalline residue was washed with diethyl ether to give crystalline sodium 1,2-benzisoxazole-3-methanesulfonate (18 grams, BIOS-Na, Compound III). Thc thus-produced BIOS-Na was analyzed using X-Ray powder diffraction (results depicted in FIG. 1), differential scanning calorimetry (results depicted in FIG. 2) and thermal gravimetry (results depicted in FIG. 3). The water content of the thus-produced BIOS-Na was 7% as measured by Karl-Fischer titration, indicating that the crystals were of BIOS-Na monohydrate.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-(Bromomethyl)benzo[d]isoxazole.

Reference£º
Patent; Naddaka, Vladimir; Adin, Itai; Klopfer, Eyal; Arad, Oded; Kaspi, Joseph; US2006/9644; (2006); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, as follows.37924-85-9

General procedure: To NaOMe (25% soln, 0.5 mL, 2.2 mmol) in MeOH (5 mL) was added thiosemicarbazide 9 (200 mg, 2.2 mmol). Diethyloxalate (0.3 mL, 2.2 mmol) was then added dropwise. The mixture was heated at 65 C for 2 h and then cooled to rt. 1-(Bromomethyl)-4-chlorobenzene (500 mg, 2.4 mmol) was added in one portion; stirring was continued at rt for 3 h and then heated overnight at 50 C. The reaction mixture was concentrated. The residue was dissolved in EtOAc (40 mL), washed with water (20 mL), and brine (20 mL). The organic phase was dried over Na2SO4, concentrated and purified by silica gel column chromatography (EtOAc w/ 0.2% HOAc). The product was triturated in Et2O to afford 59 mg of 6g as a light yellow solid (10% yield)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 37924-85-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Hin, Niyada; Duvall, Bridget; Berry, James F.; Ferraris, Dana V.; Rais, Rana; Alt, Jesse; Rojas, Camilo; Slusher, Barbara S.; Tsukamoto, Takashi; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2088 – 2091;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.37924-85-9,A new synthetic method of this compound is introduced below.37924-85-9

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-(Bromomethyl)benzo[d]isoxazole.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 37924-85-9,37924-85-9

Step 1 : A mixture of tert-butyl methyl((25′)-l-oxo-l-(4-oxo-2′,3′,4,5,5′,6′-hexahydro-3H- spiro[benzo[][l,4]oxazepine-2,4′-pyran]-3-ylamino)propan-2-yl)carbamate (156 mg, 360 muetaiotaomicron), 3-(bromomethyl)benzo[d]isoxazole (83.9 mg, 396 muetaiotaomicron), Cs2C03 (141 mg, 432 muetaiotaomicron) and Nal (64.7 mg, 432 muiotaetaomicron) in DMF (900 mu) was stirred at RT for 18 h, diluted with EtOAc, washed with H20, brine, dried over Na2S04, filtered, and the filtrate concentrated to give a residue that was purified by silica gel chromatography. The resulting material was purified by supercritical fluid chromatography (SFC) to provide tert-butyl (5)-l-((5)-5-(benzo[ ]isoxazol-3-ylmethyl)-4- oxo-2′,3^4,5,5^6′-hexahydro-3H-spiro|enzo[][l,4]oxazepine-2,4′-pyran]-3-ylamino)-l- oxopropan-2-yl(methyl)carbamate (54.5 mg, 27 %) as a white foam., 37924-85-9

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 37924-85-9.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DONNELL, Andrew F.; HAN, Xiaochun; KESTER, Robert Francis; KONG, Norman; LE, Kang; LOU, Yan; MICHOUD, Christophe; MOLITERNI, John Anthony; REMISZEWSKI, Stacy; RUPERT, Kenneth Carey; YUN, Weiya; WO2014/23708; (2014); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 37924-85-9,3-(Bromomethyl)benzo[d]isoxazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 37924-85-9,37924-85-9

(b) A solution containing 1-dimethylcarbamoyl-4-(3-trimethylsilyloxypropyl)-imidazole (6.7 g, 0.025 mole), and 3-bromomethyl-1,2-benzisoxazole (5.3 g, 0.025 mole) in anhydrous acetonitrile (30 mL) is stirred at reflux for 72 hours. The reaction mixture is cooled and mixed with a solution of sodium methoxide (3 g, 0.055 mole) in methanol (30 mL). The resulting solution is stirred at reflux for 26 hours. The solvents are evaporated and the residue is taken up in 1N hydrochloric acid (30 mL). This solution is allowed to stand at ambient temperature for 3 hours and is then made basic (pH 9) by addition of 50% aqueous sodium hydroxide solution. The mixture is extracted with methylene chloride (2*25 mL) and the combined extracts are washed with water (2*20 mL), dried over anhydrous sodium sulfate, filtered, and the solvent is evaporated to give crude 3-[(5-(3-hydroxypropyl)-1H-imidazol-1-yl)methyl]-1,2-benzisoxazole which is purified by trituration with acetone (15 mL), m.p. 129-131 C.

According to the analysis of related databases, 37924-85-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Ciba-Geigy Corporation; US4859691; (1989); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3-(Bromomethyl)benzo[d]isoxazole,37924-85-9, This compound has unique chemical properties. The synthetic route is as follows.,37924-85-9

EXAMPLE 18A mixture of 18a (20 mg, 0.060 mmol), 18b (12.7 mg, 0.060 mmol), and potassium carbonate (24.8 mg, 0.18 mmol) in DMF (1 ml) was heated at 50 C for 2h. The reaction solution was purified on RP-HPLC using 10-100% acetonitrile (0.05%TFA) to give 18 as the TFA salt.’HNMR (acetonitrile-d3, 500 MHz) delta = 8.047-8.031 (dd, J = 8.1Hz, IH), 7.738-7.723 (m, 2H), 7.503-7.452 (m, IH), 7.448 (s, IH), 7.399-7.321 (m, 5H), 7.067-7.052 (dd, J – 7.5Hz, IH), 6.173 (s, IH), 4.755 (s, 2H), 3.736-3.701(m, 2H), 3.550-3.450 (m, 2H), 2.800-2.745 (m5 IH), 2.4Gamma3- 2.404 (m, IH), 2.141-2.1 10 (m, IH), 2.036-2.001 (m IH); m z: calcd. for C26H22Cl2N202:465.37; found [M+H+]: 465.00; 466.94.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 37924-85-9.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; DING, FA-Xiang; JIANG, Jinlong; SHEN, Dong-Ming; SHEN, Hong; SHI, Zhi-Cai; WO2011/137024; (2011); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics